Plans & Kits

Click HERE for free study plan download Full size templates for this boat are available HERESpecifications Length - 13' 10" Beam - 4' 10"Bare Hull Weight - (approx) 250 lbsPower Requirement: 10 to 30 hp, short shaft outboard 'V14' is an (almost)...

The North Pacific 60 is a long range comfortable cruising yacht. Designed originally for a client in Hong Kong for use in the Philippines she has a wide beam and relatively shoal draft with a centreboard to enable her to get into anchorages...

The 12'Taw is a simple 'V' bottomed plywood runabout for two people. Construction starts with the plywood frames/bulkheads being slotted onto a plywood central girder and the transom fitted. Bottom stringers are added to stiffen the bottom area...

The client who asked for this design, Jim Ferguson (who has sadly now passed on), wanted a design that could be used in a number of ways - a true multi-role craft for use in Australian waters. The main hull can be used by itself as a simple motor canoe...

CEECAN is a simple river cruiser for outboard power. Her hull may be stretched or shortened to suit and her superstructure and deck layout changed to you own requirements. The drawings give details for the hull and superstructure construction. She may...

A classical motor launch based on a simple plywood epoxy semi-dory hull. Rear self-draining cockpit, a central siting place with protecting coamings, and a forward locker with a hatch. The shape of the bottom is given by a central backbone where the...

About Woods Downloadable Plans Free Study Plans - Click HERE Zeta is another of my small, hard chine plywood trimaran, but this time it is a fast singlehander with the emphasis on being as simple and quick to build as possible. The photo below shows my...

14 foot simple cruising sailboat for two overnight or three for a day cruise, design for protected or inlands waters.A classic design pocket sailboat with 2 berths and a small cockpit.11 sheets of ACX 3/8" plywood.I recommend using epoxy, without glass...

The Baby Wren canoe was designed for Tyrone Boats and is a smaller single seat version of our 15’10’’ Wren Canadian canoe. She has a similar hull shape with a flat (but rockered) bottom hull panel and two chines per side. This makes her...

For Motor Sailer Supplement Click HERE Our Rathlin design is not the type of motor yacht that you would normally see these days as a new ‘‘modern’’ design. Most new craft of the motor type to come off the drawing board now,...

This is a slightly smaller and more simple single chine version of the Grey Swan. The design is very adaptable and bulkhead positions, the rig and the keel configuration may be altered to suit your own individual requirements. All the panel shapes...

This was originally a design contract for the detailed refit drawings for a canoe sterned wood hull which had been totally stripped of it's original accommodation, decking, rig etc. We drew up a new design which has sleeping accommodation for 8 in...