Plans & Kits

About Woods Downloadable Plans Study plans available HERE Specifications: cold moulded or strip plank round bilge hulls,ply decks and topsides LENGTH O.A. 7.3m LENGTH W.L. .6.65m BEAM O.A. 4.3m (5.3m on Turbo version)DISPL (empty) 0.5T DISPL (loaded)...

Traditional sail boat, 4.8 m long, with outboard motor well, clinker plywood For Ebihen Study Plans, click HERE Hull length / waterline 4.80 / 4.54 m   Sail area 14 m²   Breadth / waterline 1.85 / 1.64 m   Outboard...

The Skellig 19 is based on our Skellig 18 workboat/fishing boat. In this case the client wanted a slightly bigger boat made of steel to be used as a strong and rugged work/fishing boat in Irish waters. The hull plating is 3mm over 4x75mm frames...

The 16' Bourne runabout is partly based on the Egret but with a forward raking transom and a fair amount of tumblehome in the aft quarters. She uses the same ply skin over a slotted together ply framework but the tumblehome area is planked using diagonal...

Our 15' 8" Fisher Prospector is our most popular canoe design (go to Open Canoes 15'-17'). This new version has been requested by a client who wanted a similar canoe, slightly shorter and with 7 planks per side rather than the 5 of the original design...

LOA 14.5ft - Beam 68” - Bottom 48” The Flat Head Drifter (FHD) is an enlargement of the Sol Duk Drifter(SDD) that I already have in my fleet of boats. I designed the SDD small enough to be a one person boat, and two should fish fine from...

Complete 3D building sequence with lot of details of the structure and frames. The basic plan is free .

For full printed plans for Penguin, click HERE For Penguin Plans digital download, click HERE I have only rarely been tempted to enter the design competitions run by magazines, of the two occasions I have gone to the trouble of producing the very...

22’x 6’8’’x 4’6’’, approx. 1200 lbs. weight. Multichine ply construction over pre-shaped ply frames, bottom hull panel and centre girder. Designed as a replacement for the older One design dayboat racing classes...

This is a strip planked version of our plywood motor canoes—because she is strip planked over computer generated moulds, the spacing between the moulds can be altered to give any length between 12’ and 16’. Apart from using an outboard motor...

Boats around 8 m (27 ft) are most interesting for the average sailor. The harbor fees, maintenance work, car if the boat is in the limits for road transport and the costs to buy but sure to build* are still in the range of affordability. So I have more...

By popular request, we have shortened the Raven to give a canoe easier to car-top on smaller vehicles. She can take 2 adults plus camping gear and uses the same simple stitch and tape construction process. The hull has the Raven family’s 3 panels per...