Plans & Kits

We have the computer generated mould shapes and building jig details (only) for a 22'x7'2" (6.71x2.18m) Yankee Skiff for rowing or motor power. Could be strip planked or completed in clinker ply. These skiffs have a narrow flat bottom plank and a shapely...

The Hazelnut has been designed for those who want a similar hull shape to the Peterborough model but without the turned up ends. This gives a flatter sheer line more like a guide boat—she retains the 5 plank per side shape with tumblehome for ease in...

The Skellig 26 is a wood version of the Saltee Island. She has the same rugged hull design for use as a workboat/fishing boat for coastal and offshore use. She has a large cockpit and enclosed wheelhouse with space below for a simple wc and/or galley...

About Woods Downloadable Plans Study plans available HERE Specifications: cold moulded or strip plank round bilge hulls,ply decks and topsides LENGTH O.A. 7.3m LENGTH W.L. .6.65m BEAM O.A. 4.3m (5.3m on Turbo version)DISPL (empty) 0.5T DISPL (loaded)...

Traditional sail boat, 4.8 m long, with outboard motor well, clinker plywood For Ebihen Study Plans, click HERE Hull length / waterline 4.80 / 4.54 m   Sail area 14 m²   Breadth / waterline 1.85 / 1.64 m   Outboard...

The Skellig 19 is based on our Skellig 18 workboat/fishing boat. In this case the client wanted a slightly bigger boat made of steel to be used as a strong and rugged work/fishing boat in Irish waters. The hull plating is 3mm over 4x75mm frames...

The 16' Bourne runabout is partly based on the Egret but with a forward raking transom and a fair amount of tumblehome in the aft quarters. She uses the same ply skin over a slotted together ply framework but the tumblehome area is planked using diagonal...

Our 15' 8" Fisher Prospector is our most popular canoe design (go to Open Canoes 15'-17'). This new version has been requested by a client who wanted a similar canoe, slightly shorter and with 7 planks per side rather than the 5 of the original design...

LOA 14.5ft - Beam 68” - Bottom 48” The Flat Head Drifter (FHD) is an enlargement of the Sol Duk Drifter(SDD) that I already have in my fleet of boats. I designed the SDD small enough to be a one person boat, and two should fish fine from...

Complete 3D building sequence with lot of details of the structure and frames. The basic plan is free .

For full printed plans for Penguin, click HERE For Penguin Plans digital download, click HERE I have only rarely been tempted to enter the design competitions run by magazines, of the two occasions I have gone to the trouble of producing the very...

22’x 6’8’’x 4’6’’, approx. 1200 lbs. weight. Multichine ply construction over pre-shaped ply frames, bottom hull panel and centre girder. Designed as a replacement for the older One design dayboat racing classes...