Plans & Kits

The Kennet can be built either as a 20' or a 22' slipper launch details and panel shapes are given on the plans for both versions. She has a "V" bottom forward which flattens out as it runs aft giving an easily driven hull shape which has plenty of grip...

The RUFUS 17' motor boat is a simple rugged craft with jaunty good looks. She has 3 chines per side and plenty of freeboard and beam, giving her an excellent carrying capacity and very good stability. She can be made as a simple open launch, in which...

buy Trilars plans to make Larsboat into a trimaran Larsboat was built by Lars Hasselgren to replace a Folboat that had finally met its end. Lars wanted capacity for two, plus decking, as with his old boat. I took Toto and...

"KINGFISHER" - 17' Utility launch, inboard or outboard. Includes 2 profiles, arrangements, lines, table of offsets, construction plans. 3 sheets plus article reprint. Build her in your garage over one winter. You can trail her anywhere and use her on...

This is a multi-chine plywood entrant for the Mini-Transat race which takes competitors across the Atlantic to Antigua via the Canary Islands. It is known as one of yachting's most dangerous races and is fought by boats with a maximum length of 6.5m. We...

The PALOMA, in its various versions, derives from a fruitful collaboration with our clients and, perhaps, also for this reason, it seems to have met the favour of the public. It all started from the request of a client who wanted an inboard motor boat,...

The Mandarin 17 has a beam of 45” and is designed with traditional oarlocks to mirror the traditional Thames skiffs. She may be fitted with a single or double rowing position and the plans detail a rudder and traditional foot rests. She uses 5 to 6...

24’x 6’ using 22 sheets of 3/8’’ and 2 sheets of 1/2’’ ply in it’s basic form. A water ballast tank and motor well may be used and the whole craft made in three 8’ boltable sections for ease in...

The Thirty + is one of Joe Dobler's better known large trimarans. It was originally designed for and built with plywood, but was soon put into production as a fiberglass model. Aparently the FG version was never as fast as the wood prototype, though...

Simple sharpie pocket cruiser for coastal and off-shore cruising. This project start as a special order from “Tigrou”, a guy how really knows what he wants, and also a skilled boat builder. We have in common quite a fascination for junk sail...

The essence of this design lies in its simplicity. Easy to mark and cut panels, folded onto each other, and sealed with Scotch Waterproof Tough Tape. The tape is applied to all seams, folds and edges, and produces a fully waterproof hull, that is as...

The 14ft Nuthatch Pram Thank you for choosing to build the 14 foot Nuthatch Pram. After designing and building the 8ft Nuthatch Pram and designing the 12ft Nuthatch Pram, I thought that a larger version of the hull would be a good fit in my series of...