Plans & Kits

This package provides you with the epoxy, fiberglass and related tools needed to begin your Portage Pram build. If you are efficient with your supplies this should seee you throught the whole build. This kit does not provide things like denatured...

This is the Selway Fisher version of an old favourite - the Prospector type open canoe. The original Prospectors were originally designed in Canada and known as the "workhorse of the North". They had to have a good carrying capacity for all of the...

This is a 14’ version of our larger Peterborough design but in this case we have gone for a design with 7 planks per side. She still uses the simple stitch and tape method of construction and has seats for 2 crew. Midships depth is 12 1/2” (0...

Free Plans - click HERE to download No Stays Required It seems inevitable that for a portable boat that fits in the family vehicle, the sailing version should have a mast and boom that does the same thing. Past attempts at this were specific to...

The hull for this launch was originally based on our Power 16 model but instead of going for a simple flat bottom panel, we have used a 'V' bottom shape. Whilst this makes construction time a little longer it gives a slightly better ride in choppy...

The Thames 32 has primarliy been designed for Foam Re-inforced Plastic (FRP) construction - the plans give details of the male plug (so that a female mould tool can be made) which can also be built as a finished wood hull. The wood hull can be built...

This is the first of a new line of dinghies and dories which combine traditional looks and performance with quick and easy methods of construction. We have been able to modify the normal clinker plank shapes for this boat so that they can be stitched...

I have now updated one of the first Selway Fisher designs, the Highlander 7'6". The original design was drawn up in the 70's well before computers and boat design software was available - so the design started with a carved half model from which the...

Fliptail 7 Assembled - 7'2" (219cm) Long - 40" (102cm) Wide - 16" (40cm) High. Folded - 7'2" (219cm) Long - 24" (60cm) Wide - 10" (25cm) High. Weight - Basic boat from 18 kilos (39lbs) Carrying capacity - Three adults or 225 kilos...

About Woods Downloadable Plans Click HERE for study plans Specifications: Dory shaped ply hulls and decksLENGTH O.A.6.65mLENGTH W.L.6.0m BEAM O.A 3.9mDISPL (empty) 0.4T DISPL (loaded) 0.8T HEADROOM 1.22m DRAFT 0.25 - 0.8mSAIL AREA 20.9sq m Note 6...

Designed for a client who wanted a simple stackable fishing dinghy which he could easily carry himself, the Doracle uses just 2 sheets of 4, 5 or 6mm ply. She may be built in 2 pieces with the forward piece stacked inside the aft section. The 2 halves...

The Rodcat 5 is a simple beach catamaran with asymmetric hulls. To make construction quick and easy, each hull is built up from a flat inboard side which is laid flat on a workbench. The transom and ply bulkheads are then fitted to this side and the...