Motor Boats to 16'

This is a smaller sister to the 13’ Harrier—she has the same simple ‘V’ bottomed hull shape which has plenty of stability and room in such a short length for fishing and pic-nicking. Under the seats can be used for flotation and/or stowage and...

The Cape Cod is a motor dory based upon the Swampscott model with it's flat but rockered bottom panel and 4 planks per side. Unlike the sailing Swampscott, the bottom is kept fairly wide aft so that she can take a reasonable size of outboard (up to 35...

A lovely little skiff made from four sheets of 1/4’’ plywood using simple stitch and tape techniques. She has a fine entry for moving quickly and easily under electric outboard power (a conventional petrol outboard may also be used) with...

This sturdy craft has been designed for a client in Scotland who wanted a rugged general purpose boat for fishing and diving in rough water. She may only be 14’ long, but she is for all that, a large boat and she incorporates both integral buoyancy...

The Port Pegasus is a clinker boat which may be used as a pure rowing boat or fitted with a small diesel (ie Farymann 7.5) as a small motor launch with classic appearance.   As a general purpose launch, she could be fitted out in a variety of...

The Power 1.2 is a development of our Power 1 design. She has increased beam and the chine has been lowered to give a more stable shape so that her side decks can be used comfortably. The drawings give details for a cabin arrangement with 2 full length...

This is a very simple stitch and tape design using 5 sheets of 9mm (3/8") ply with pre-shaped hull panels and transoms. With a beam of 4'6" and a mid depth of 16" she has plenty of room for fishing, camping or for family pic-nics.She may be rowed but is...