Power 1.2 Plans

Write a Review
Printed plans shipped and PDF plans emailed from Selway Fisher


The Power 1.2 is a development of our Power 1 design. She has increased beam and the chine has been lowered to give a more stable shape so that her side decks can be used comfortably. The drawings give details for a cabin arrangement with 2 full length berths and plenty of stowage for cooking gear. The aft end has been kept as a parallel section so that increasing or decreasing her length is quite simple and she can be fitted out to suit your own requirements (we will be happy to advise and draw up details of any particular changes to the arrangement shown on the drawings). Construction is quick and simple and she can take outboards up to 50 hp. A wheelhouse arrangement is also included - see Photo Gallery page for photos of an extended version of the Power 1.2 with standing headroom and 5 berths.

Also note that an additional drawing has been added to the plans so that the hull can be made using the ply over frame method.

Power 1.2 Particulars

LOA 16' 1" 4'9"
Beam 6'5" 1.96m
Hull Mid Depth 2' 5 1/2" 0.75m
Draft 14" 0.36m
Approx. Dry Weight 400 lbs (open version)
680 lbs (cabin version)
183 kg
310 kg
Engine Up to 50 hp  
Speed 24 knots with 25-30 hp  
Hull Shape U shape - flat bottom with 2 planks per side
Construction Methods Stitch and tape
Major plywood requirements for hull 7 x 9mm sheets + 7 further sheets for the cabin/wheelhouse
3 x 12mm sheet
Guidance Use General purpose for up to 6 adults (open version) - she is easily extended (or shortened) - estuary/coastal
Drawing/Design Package 8 x A1 drawings + 7 x A4 instruction/spec sheets
Additions and alterations included with the plans Mark 2 version - 20' x 6'10" (outside of hull skin)
Mark 3 version - 21'x8'
View AllClose

0 Reviews

View AllClose