Dinghies

This dinghy was developed from our Skylark Mk 2 series of pram dinghies. The dinghy retains the flat, rockered bottom panel and the side panels are round bilge in shape and are either cold moulded or strip planked over the moulds which are drawn full...

Heron class sailing dinghy was originally designed by Jack Holt and has been around now, for many years - many sailors first took to the water in a Heron and she remains a positive favourite amongst young and old alike with a very active Class...

Again following the North American theme of solid working craft that are sadly no longer with us we have in the Acorn a sweet little craft which, with modern materials and methods, is easily built. Originally designed for carrying small cargoes she has,...

The Thames 20 rowing skiff is an elegant and very attractive skiff based upon a craft that we originally designed for a client who wanted a simple personal exercise craft which could be used on open inland waters. Construction uses the stitch and tape...

This is a 4' version of our Mark 2 Skylark series of pram dinghies with a beam of 3' (0.92m). The design was developed for "Wood 'n' Tots" toys as a safe fun boat for small children to learn basic water skills in. Construction is stitch and tape using a...

This is my first ever design resurrected—I designed her as a school kid in 1969 and built her in the garage during 1970. In those days home computers did not exist and so she was built ply over frame.Having remodeled the lines I have redeveloped her...

This design is an extended 20' Cambridge type punt but with proportionally more beam. Having said that, the beam can be easily altered by changing the width of the bottom plank/panel and frames. Two methods of construction are shown - ply plank over...

Very much on the lines of the American Cat Boat, we have been able to retain much of the character of these charming boats by using a round bilge hull shape simply made using strip planks over chipboard moulds. The planks can be of most easily...

There are some rowing races that take place at West Kerry in Eire using 27' rowing gigs. The races take place in the open sea, in harbours and estuaries where there is often a severe chop. Each gig takes a crew of 4 with an additional member acting as...

This rowing skiff has been lightly modeled on the traditional Thames river skiffs. They were usually a lot longer and around 4' wide. Here, we have produced a design which will delight the rowing enthusiast who wants a light weight skiff with moderately...

The Sunray was designed for Brightwater Boats - she is built using the clinker ply method with the ply frames and girders set up together on a strongback. She has a foredeck and aft tank plus side benches.   LOA 11'10" (3.6m); Beam 4'8" (1.43m);...

This design has been based upon our Northumbrian Coble designs - the client wanted a very stable seaworthy design mainly for outboard power but which could also be rowed and take a sail plan. Basic construction is for stitch and tape but the moulds/jig...