Paul Fisher

This a smaller version of our popular 12’9” Waterboy. The design has the same high volume hull with tumblehome and 4 planks per side with a narrow flat bottom as it’s bigger brother. Construction is simple stitch and tape using 4mm ply...

The Ranworth is a typical Broads type sailing cruiser with generous beam and relatively large sail area to catch the wind above the reeds. She has 3 berths and space for a small galley and wc compartment. The cockpit is generous in size and could take a...

The Skylark 10, for her length, is a large dinghy and quite capable of accommodating a family of 2 adults and 3 children comfortably. Several 10's have been built by clients who have a spare rig (Mirror etc) and who want a simple and easily built hull...

We have the computer faired mould, inner stem and transom shape for an open boat based upon a 16’ x 6’ Lightship’s Lifeboat—a sturdy little seaboat which could take 12 men and carry a simple lug rig—they were clinker built but could be strip...

This version of the Skylark class of pram dinghies was at the request of a client who wanted a comfortable river boat with the simplicity of construction of the smaller Skylark stitch and tape dinghies and with the large size that a pram shape of this...

After many requests, we have extended the simple concept of the Power 1 and 2 motor launches to a length of 32' with a beam of 10'9". At the moment, the drawings for the hull and deck construction are available allowing the client to choose or design...

The Highlander 11' Dinghy - this is a relatively new design with a beam of 5'2" and draft of 7"/3'1". Approx. weight is 105 lbs and Sail Area is 66 sq.ft. The hull shape very much follows the original Highlander model with it's double chine, except...

These plans are for the steelwork only of a 17.45m (57') wide beam barge. The plan set consists of 6 drawings covering Hull Construction, Hull Construction Details, Deck/cabin Construction, Deck/cabin construction details, Hull panel shapes and Rudder...

One of our clients wanted to match the advantages of strip planking with an easily built but attractive motor barge hull. In stead of using a slab sided hull seen on so many modern steel barges, we have been able to use the ability of strip planking to...

This is a curvaceous and neat example of the traditional American catboat. She has been designed to give maximum usability and space in a 16' long package. There is plenty of room for storage and to fit the batteries for an electric drive pod. The...

16'x5'6" ply motor launch of ultra simple construction using pre-shaped ply hull panels, frames and transom. The chine joints are completed with epoxy resin fillets and tape making construction quick. A weekend's work will see the hull panels marked out,...

The 8' Skiffle is a simple motor boat designed for children to use although she can accommodate a small adult. The hull uses a flat bottom panel with single bilge and side panels and uses simple stitch & tape methods in her construction. She can take...