Misc

Lightweight hook used with light lines and elastic shock cord in a variety of applications. Great located on bulkheads. They provide a quick and economical means of securing lines, sails and other gear. Recommended: short length of 3/16" shock cord here...

Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at...

Stamped pad eyes - strong and economical. Made from 304 stainless steel. Part # A B C D E SD-081101 7/16" 7/16" 1-1/8" .060" 5/32" SD-081102 1/2" 9/16" 1-3/8" .080" 3/16" SD-081103 3/4" 3/4" 1-3/4" ...

316 Stainless Reference Imperial Metric A 9/16 in. 14 mm B 3/16 in. 4.8 mm C 1 7/16 in. 36.5 mm D 3/16 in. 5.0 mm Weight 0.2 oz...

Machined 304 Stainless Used for bow eyes or anywhere a secure attachment point is needed. Metric threads. Part No. A B C D ThreadLength SD-080708 8mm(5/16") 109mm(4-5/16") 17mm(11/16") 76mm(3") 79mm(2-3/4") SD-080710 10mm...

This stainless steel deck plate can be used with our RL-349 shroud adjuster or RL-305-A or RL-205 blocks. It comes complete with clevis pin and ring. wt 1/2 oz.

Various sizes Text: Ronstan Ropeglide Rings. Reduce weight and complexity with ultralight, low-frticiton rings that can be used for deflecting lead lines or for barber haulers, lazy jacks, or as a replacement for blocks on vangs, etc. Simple and reliable...

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.Features:Lightweight and corrosion proofGreater abrasion resistance than traditional plastic...

Brace hooks are used instead of barber haulers, to hook in the windward spinnaker sheet after gybing.Stainless steel hookNeoprene pad

Reefing Hook - Mount this hook under the Tack Shackle for quick reefing - hook the reef tack under this hook. The base is 1/8" thick and 1.5" x 0.75". The two hooks are made from 1/4" dia. round stock. The mounting hole is 1/4" dia. There is a little...

Built with a stem for extra strength. Base 3" long by 1.5" wide tapering to 5/8". Stem is 4" long, 5/8" wide & 0.085" thick w/ 3 1/4" holes. Takes up to 6 #10 screws. Fin has two 1/4" holes and one 3/8" hole. All stainless steel construction.