Fasteners
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Deckplate Machine Screw Fastener Kits
$2.00Stainless SteelThe kit you need will be determined by the thickness of the material that you are mounting to. For any material that is 3/8" (9mm) thick then we recommend 1" machine screws with nuts and washers. If the material is 1/4" (6mm) or less, we...$2.00 -
On Sale
Raptor 18 Gauge Composite Brads
$11.89 - $13.99RAPTOR® nails are not susceptible to the corrosion and oxidation that attacks metal, so your manufactured product retains its beautiful new appearance. RAPTOR® nails and staples can be sanded and sawed without tool damage, so you will not need to...$11.89 - $13.99 -
Silicon Bronze Washers
$0.50 - $3.99#10 through 3/4" Washers should be used under nuts and bolt heads when a soft material such as wood is being tightened against.$0.50 - $3.99 -
Potter Chainplates
$16.00These U-bolts are used for the chainplates on the Potter 15 and for the Baby Stay on the Potter 19$16.00 -
Silicone Bronze Threaded Rods
$19.99 - $55.99Silicon Bronze All ThreadVariously known as "Ready Rod", "Allthread", or "Threaded Rod", this stuff belongs in every boat builder's shop. Each rod is a box of assorted bolts as you can easily cut them to any length required with a hacksaw.Silicon Bronze...$19.99 - $55.99 -
$4.99
-
Bags of Silicon Bronze Ring Shank Nails
$8.00 - $32.00Long a boat building staple, no pun intended, Silicon Bronze Ring Shank nails have always been expensive. So we are offering them individually here in case you don't need a Bag of 100 or worse yet a pound of the little guys. We can get other sizes so let...$8.00 - $32.00 -
Omer 15 Gauge Pneumatic Nailer
$399.00Recommended Tool for Raptor 15 Gauge Composite Nails The B17P.763 Finish Nailer drives RAPTOR® 15 gauge composite finish nails from 1/2" up to 2" lengths. It's magnesium body provides extreme power with an outstanding power-to-weight ratio...$399.00 -
Stainless Steel Pan Head Machine Screws
$0.25 - $0.95Stainless Steel Pan Head, Phillips, SS 316 Machine Screws - These are the most common sizes for the pintles, gudgeons and rudder assemblies for the boat kits that we sell. I have long kept a handful of these in my shop for various...$0.25 - $0.95 -
$1.18
-
Well Nuts
$1.00 - $1.25Rubber and brass These are used primarily to attach items such as kayak footbraces and other pieces of hardware to plastic boats. They work by expanding behind the surface as shown in the photo below. First a hole is drilled, then the well nut is...$1.00 - $1.25