Hardware

Stainless Steel Light, fast, positive. No cotter pins, New spring tension captive pin maintains steady pressure on sides of shackle undersailing conditions, and allows easier opening for quick release. Stainless steel spring.

Long a boat building staple, no pun intended, Silicon Bronze Ring Shank nails have always been expensive. So we are offering them individually here in case you don't need a Bag of 100 or worse yet a pound of the little guys. We can get other sizes so let...

Heavy Stainless Steel Factory West Wight Potter Anchor Roller - 10.5" length by 2.25" wide.

Ideal for larger boats See our pintle & gudgeon compatibility chart This set consists of two gudgeons, one short pin pintle, and one long pin pintle. There is no hold down included. All parts are stainless steel - Fits 1" or 1-3/8" thick rudder...

Recommended Tool for Raptor 15 Gauge Composite Nails The B17P.763 Finish Nailer drives RAPTOR® 15 gauge composite finish nails from 1/2" up to 2" lengths. It's magnesium body provides extreme power with an outstanding power-to-weight ratio...

These are exactly the same drip rings that the last double paddle you bought had. So if you lost or wore out those or you made a new paddle and need drip cups for it, here is your chance. Fits handles from 1-1/8" up.Part #ABWeightK7372901"7/16".20

Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift...

Stamped Stainless Steel Stamped stainless eyes. Both eyes made from 0.075" strap. Part Length Width Eye Width Hole dia. RL-311 2-1/4" 1/2" 3/4" 3/16" RL-313 1-1/2" 3/8" 3/8" 3/16"

Boom vang system for Potter 15 or 19. Includes Ronstan block, combo V-jam block, shackle, 2 eye straps, and proper length of polyester double braid.

Injection Molded Nylon/Chrome Plated Zinc. LED Fold Down All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: drawing is not proportional   Part # A B C D Fastener SD-400013 24" 1-7/8" 2-1/2" na #8FH

Injection Molded Nylon

Suits mast dia.s between 76mm-115mm (3"-4 1/2") 316 Stainless Used for terminating wire rigging Wt. 3.9oz - 110g