Canoes & Kayaks

The Carrick open canoe was designed for Tyrone Boats specifically for sail racing. She is certainly fast but is also very handy when paddled. She has 5 planks per side giving her a nicely rounded shape with a wide waterline beam for plenty of stability...

I was asked to take the 15'€™ (4.58m) Outboard Motor Canoe design extend it to 18' and also add 2" (50mm) to the hull depth. This new design uses the same basic hull shape with it’s narrow flat bottom panel with 3 further panels added each side...

Like her bigger sister, the 12’ 6” Esk is a development of our Dart design. She has the swept up bow and flared out forward sections to help her in choppy waters—and we have retained the knife edge to the rear sections to give her good...

This is an outrigger canoe of classic Hawaiian design. Classes of these craft are very popular, especially in places like New Zealand where they are raced in various lengths—this example being one of the shortest. They are noted for their stability...

The name ‘Peterborough’ was often used to describe any open Canadian type canoe but more especially those with a lightly rockered hull which had a moderate beam and some tumblehome. Our example has relatively narrow waterlines fore and aft to make...

The Arctic Skua is a lightweight canoe yawl that has a nod towards the small canoe yawls that were popular in Europe during the last century for touring and racing. She uses 4mm ply and the stitch and tape method of construction to produce a easily built...

Our LITTLE KATE open canoe is a modification of the classic John Rushton Wee Lassie design which he was producing over a hundred years ago. The originals were of lapstrake Cedar planking but we have modified the design so that it can be built using the...

The Waterman canoes are more than simple open Canadian type canoes; they are a complete canoeing experience - from simply being a family open day canoe to a camping/sailing/portaging craft capable of being used to explore normally impenetrable rivers and...

The ROBIN is a design requested by a client who had already built one of our Wren stitch and tape ply canoes and who wanted a similar craft in strip planked construction with a sweet round bilge shape. The basic parameters for this design are similar to...

So far this is the smallest strip plank canoe we have designed - although we do know that strip planked version of our Little Kate design have been made simply by using the mould shapes we give for clinker construction and putting a curve through the...

Adrian Cabedo (see the Wren) came back to us for a second design. He wanted a slightly more sophisticated design, still of the Canadian type, for long distance portaging and camping in Spain. Basing the new design on the Wren, we increased her beam to...

The Marathon series of open canoes started with the Marathon 18 which was designed as a fast long distance canoe for a crew of 2 who would use her to race and portage around locks etc - so good straight line speed and light weight were essential...