Tatoo 598 Study Plans PDF

An economical and singular weekend cruiser

For Tatoo 598 Full Plans, click HERE

Fast overview:

Motor boat with a little cabin (dog house) opened below and closed with a dralon curtain. Galley, 2 berths, Headroom of 1,77m, 60hp outboard, trailerable, big cockpit with removable table and foldable bimini. Epoxy Plywood construction excepted the strip planking bottom hull shell. Unsinkable.

Home built with a simple construction. Economical in terms of construction and fuel consumption.

Characteristics

Hull Lenght: ..................................................... 5,98 m

Length at DWL: .................................................5,98 m

Length over all (LOA) outboard down............ 6,71 m

Length over all (LOA) outboard up.................. 7,02 m

Beam max. .........................................................2,25 m

Freeboard - at stem- ......................................... 0,83 m

Freeboard - at transom- ................................... 0,63 m

Draft, outboard engine up ................................ 0,37 m

Draft, outboard engine down ........................... 0,71 m

Displacement light ..................about 530 kg without outboard engine.

Displacement full loaded.........about 1000 kg with 4 persons, full tank, etc...

Outboard Engine Honda 60hp

Fuel tank: 1x55l or 2x55l

Headroom 1,77m, 1 big forward double berth, galley, sunbath on deck, anchor locker.

Conception cat. D5 - C4

Epoxy Plywood construction except for the strip planking bottom hull shell.

Flottability : Foam

Self draining Cockpit

Trailerable

Delta. D / Cm Immersion 86Kg / cm

Aurelio asked me for a new boat, much longer, for his wife and himself, for the Como lake.

The aim of this design is to run a little bit more 20 knots at a maximum speed, for a low fuel consumption.

It could be easily understood when you come from the sailing world, much more slower in terms of cruising speed. (Aurelio is the Inseparable 398' s owner)

That's why she weight only 530kg in light displacement configuration and is equipped with the minimum.

She is built in strip planking sandwich with fiber glass for the bottom hull shell and with epoxy plywood for all the rest of the boat: the result is a very cheap and light construction for a singular little model.

TATOO 598 is designed for sheltered waters, at relatively low speeds for walking around. The hull is designed to reach this target.

Scantlings are defined relatively light to fit this specifications and are not calculated for much higher speeds in very choppy waters and bad weather. She is a reasonable economical ship for a quiet use.

Full set of plans with cutting files of all parts, excepted strip planking bottom hull shell.

PLANS are designed only for people who will use the cutting files.