Sailboat Hardware

Swivel Cleat & BaseSwivel cleat bases permit easy cleating and releasing from any angle. Sheave can be relocated to allow the control line to feed from below. Comes complete with a 28mm(1-1/4") ball bearing sheave, small 'T-Cleat and the 'Fast...

This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel. (note: pintle...

Comes with manufacturer two-year warranty Material - Aluminum/Stainless Steel Min line size - 6mm / 1/4" Max line size - 14mm / 9/16" Hole Spacing - 32mm / 1 5/16" Hole Diameter - 5mm / 3/16" Max Working Load - 140 kg / 242...

Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many trailerable sailboats up to around 26-feet. These are...

Extruded, anodised, aluminum B&B Custom Sailtrack Duckworks is pleased to offer a new custom sailtrack suitable for all sailboats small and large. This track has been designed by B&B and produced in the USA. Their goal with this track was to...

The ANDERSEN automatic bailers are available World Wide and recogized by dinghy sailors as the most effective and reliable means of automatic bailing. ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service...

Comes with manufacturer two-year warranty Material - Aluminum/Stainless Steel Min line size - 3mm / 1/8" Max line size - 8mm / 5/16" Hole Spacing - 21mm / 7/8" Hole Diameter - 4mm / 5/32" Max Working Load - 100 kg / 220 lbs

This is the factory West Wight Potter 15 and 19 gooseneck. It does not include any boom pieces, just what it pictured.

This is a very robust set of stainless steel rudder hardware. The vertical gudgeon that bolts against the transom is a full 1/8th (0.125) of an inch thick and 1.25" wide. The rudder gudgeons are made from 1" wide strap and are 3/32 (0.090)" thick. The...

These stainless chainplates are used for both the Potter 15 and the Potter 19.

Alloy cleating arms Grade 316 stainless steel fittings Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and...

See our pintle & gudgeon compatibility chart This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel - Fits 1-1/2" through 3" thick rudders. (note: pintle tangs cannot be adjusted for rudder...