Plans & Kits

The photo above is of a Piragua built by Bob Taylor down in Texas. Piragua is a very simple useful boat. I probably get more Piragua photos than of any other boat, an indication that more Piraguas get built. Piragua is made from two sheets of 1/4"...

A sensational sailing canoe 15' 3" x 38" - 4.65m x 94cm Maximum recommended capacity - 375lbs - 171kg Weight: 65lbs - 30kg Sail area: 61 square feet - 5.7m For printed plans of Chautauqua, click HERE CHAUTAUQUA (shuh-TAW-kwuh) Chautauqua is a SOF decked...

Mayfly14 is a straight forward flat bottomed plywood skiff for sailing and rowing. She's easy to build because her planks have no twists. That means that the chine log and wale bevels are constant for all practical purposes and can be presawn before...

The name ‘Peterborough’ was often used to describe any open Canadian type canoe but more especially those with a lightly rockered hull which had a moderate beam and some tumblehome. Our example has relatively narrow waterlines fore and aft to make...

For Scraps as printed plans, click HERE Our tides here run to 10 or 12 ft, which means that little Spook has to be anchored out in close to 20 ft of water at high tide in order to not be aground at low tide. Spook, my 18ft gaff sloop lives on a trailer...

Can you walk this plank? Actually the request was for a stand up paddle board, sort of like a surf board that is paddled while you stand up like on a real surf board shooting the big waves in Hawaii.I had all sorts of reasons for not designing it, the...

The Foldak is constructed from a lightweight wooden keel assembly, a pair of drop down plywood floors and four hinged laminated hoops. The structure is then covered with PVC cloth. The edges of the cloth are protected by wooden strips.The Woodenwidget...

The Howth Head is a plywood version of the steel Lambay Island design. Like the Lambay, she is a 22' motor boat with a large cockpit area and comfortable accommodation with 2 large berths, w.c. compartment and galley with dining space in the cockpit...

This was an interesting way to start a design. The client had a couple of Super Snipe engines kicking about and he wanted to sell them. What better way to do it and to get the greatest return for his money than to package them. The package that we chose...

The Arctic Skua is a lightweight canoe yawl that has a nod towards the small canoe yawls that were popular in Europe during the last century for touring and racing. She uses 4mm ply and the stitch and tape method of construction to produce a easily built...

The original 14' Skylark was drawn up as a simple extension of the Skylark 12 using the same rig and simple fit-out details as the 12. We then remodelled the hull with an additional chine to give the Mark 2 version. This version uses the same hull shape...

For Pelegrin Full Printed Plans, click HERE Most languages have a word which conveys the image of the wanderer, someone who has a dreamy far away look in their eye, who stays for a day or three then moves quietly on toward a goal that no one else can see...