Plans & Kits

The 16' Hazelnut is based on the 17' version but has been drawn up with the clinker/ply construction method in mind using a building jig and moulds to gain the plank shapes. She has 5 planks per side.The plank shapes and building details are also...

 The Shelduck Duck Punt is a simple plywood punt suitable for river and canal rowing and some quiet fishing. Although she has the flat bottom of the Eider Duck punt, she is double ended like the Ruddy Duck punt.Construction is stitch and tape...

  The Sandolo is a traditional flat bottomed rowing boat used in Venice and the Venetian Lagoon and unlike the Gondola is, like most craft, symmetrical about it's centerline. In fact it is of a simple flat bottomed, single chine shape with...

The Clyde 18 is a modified Power 1.3 Mk 1 design. The hull shape is a simple deadrise type, single chine 'V' bottomed. The hull is parallel sectioned aft of the wheelhouse which means that she can be easily lengthened or shortened. Construction is for...

This new design is based on the Mark 1 single chine version of the Rhum 11'6" general purpose dinghy. The original Rhum has been extended by 12" which gives more space for her to be fitted out as a proper camping dinghy with space for a sleeping area and...

Oarsome Chance came to me for the design of a 24' Coastal Rowing Skiff which could be more easily used as a multi-role boat and which was safer for use offshore. Instead of a double ended design, often used for this role, we went for a transomed design...

The Kari 24' is based on the Kari 2 which, itself, was based on the lines taken off the original Kari Faering. In the case of this new 24' design the client wanted a rounder hull with slightly harder bilges and so we modeled a 6 plank per side design...

This design is a modern interpretation of the traditional Koa fishing canoes which were 'dugouts' and made from a single log. The hull has a narrow flat bottom with 4 planks per side - the top hull panel has some tumblehome in it to emulate the log shape...

This is the Selway Fisher version of the lovely Whitehall Skiff. The origins of the Whitehall Skiff (or pulling boat) are a little vague - some say that her design came from some of the small workboats around Whitehall in London but others trace her...

The Siam 25 has been drawn up as a open dive and fishing boat for a client in the far East that can also be used for simple family trips around the islands. Her hull has been based on the Rathlin 20' motor launch hull - a robust and stable design. The...

Below are photos of Tim Thedon's Jarvis 21 under construction.               21' Jarvis Particulars LOA 21'4" 6.52m Beam (excl. gunwale rubbers) 7'9"" 2.35m Hull Mid Depth 3'4" 1...

This design is based on a double ended version of our 12' 4" Petite Brise Swampscott dinghy. Swampscotts as a breed usually have a narrow 'tombstone' transom making them more or less double ended (semi Swampscott dorys have a wider transom) - when...