Paul Fisher

I was commissioned to design a GRP family motor sailer with the emphasis on getting the most comfortable "package" into 27' LOD. The design has centre raised deckhouse which houses the galley and dinette with interior steering position...

The design for the Surf 8 started with the need for a small dinghy that would have pretensions to be a small multi role dayboat - an excellent sailing craft, motor boat and still be easily car toppable. Taking the Skylark...

The Ocean Crossing Kayak is the first stage in an experimental project - some ocean going kayaks are quite large with volume to carry extensive stores and are made from exotic materials to keep weight down - some have 'castles' at bow and stern so that...

The Hartford 18' skiff was drawn up for the Great River Race and to take a crew of 4 - a cox, 2 oarsmen plus a passenger who could take a turn at rowing. She has 5 planks per side and is built using the stitch and tape method for the shortest...

This is a beautiful double ender for simplified strip plank and epoxy construction. Temporary moulds are set up with pre-shaped stem, stern post and hog and then the boat is planked with thin strips of Cedar glued edge to edge with epoxy giving a...

This is a very simple 11’6’’x5’ ‘V’ bottomed dinghy for general purpose use. Her ‘V’ bottom and 5’ beam gives her both stability and a good turn of speed under both oars and sails. She can be built as...

At just over 13' length, the 4m Mini Yacht has 2 berths and space for a portable wc inside plus large areas for stowage or floatation. She has a daggerboard type keel with a steel core and lead bulb which is bolted in place for sailing but which can be...

We have drawn up the steel construction details (hull, deck, sterngear and rudder details only) for this 32' canal boat based on a tug design with a fantail aft end and narrow boat lines amidships running into a tug type bow. She may be fitted out in a...

The Greenshank is a pram version of the Redshank and has a length of 7’6’’ and a beam of 4’. The pram bow gives more space forward for stowing gear or for transporting crew out to your yacht. She is an ideal fishing dinghy...

The Kennet can be built either as a 20' or a 22' slipper launch details and panel shapes are given on the plans for both versions. She has a "V" bottom forward which flattens out as it runs aft giving an easily driven hull shape which has plenty of grip...

The RUFUS 17' motor boat is a simple rugged craft with jaunty good looks. She has 3 chines per side and plenty of freeboard and beam, giving her an excellent carrying capacity and very good stability. She can be made as a simple open launch, in which...

This is a multi-chine plywood entrant for the Mini-Transat race which takes competitors across the Atlantic to Antigua via the Canary Islands. It is known as one of yachting's most dangerous races and is fought by boats with a maximum length of 6.5m. We...