Paul Fisher

This handy pocket cruiser has been designed for a client who wanted an ultra simple and cheap sailing cruiser for estuary sailing and which would get him across the Channel. The construction could not be more simple and rugged with pre-shaped hull panels...

The 15' Huntsman is a simple 2 planks per side open canoe with a V bottom and single chine making construction fast with the stitch and tape construction method. The canoe can take 2 adults and more if required and is ideal for trekking with camping...

There are some rowing races that take place at West Kerry in Eire using 27' rowing gigs. The races take place in the open sea, in harbours and estuaries where there is often a severe chop. Each gig takes a crew of 4 with an additional member acting as...

This rowing skiff has been lightly modeled on the traditional Thames river skiffs. They were usually a lot longer and around 4' wide. Here, we have produced a design which will delight the rowing enthusiast who wants a light weight skiff with moderately...

The Sunray was designed for Brightwater Boats - she is built using the clinker ply method with the ply frames and girders set up together on a strongback. She has a foredeck and aft tank plus side benches.   LOA 11'10" (3.6m); Beam 4'8" (1.43m);...

20' x 5'6" ultra simple light weight stitch and glue sharpie. Can be constructed in 3 sections for easy transport and storage. Also optional cubby and water ballast tank. Pre-shaped side and bottom hull panels are stitched and taped together with ply...

This design has been based upon our Northumbrian Coble designs - the client wanted a very stable seaworthy design mainly for outboard power but which could also be rowed and take a sail plan. Basic construction is for stitch and tape but the moulds/jig...

This is a 22' motor boat with a large cockpit area and comfortable accommodation with 2 large berths, w.c. compartment and galley with dining space. The drawings are originally for steel construction but she could be made out of plywood over a simple...

This is a steel multi-chine motor barge for use in the waters of the UK and Europe, crossing the Channel and exploring the rivers and canals of the European mainland. She has a section of parallel middle-body which means that she can be stretched. She...

The 6’ beam version of the Ptarmigan 15 is quite popular and now we have extended the whole design to 17’x6’11’’. Although only 2’ longer than her sister, the Ptarmigan 17 has quite a bit more volume for...

The North Pacific 60 is a long range comfortable cruising yacht. Designed originally for a client in Hong Kong for use in the Philippines she has a wide beam and relatively shoal draft with a centreboard to enable her to get into anchorages...

The 12'Taw is a simple 'V' bottomed plywood runabout for two people. Construction starts with the plywood frames/bulkheads being slotted onto a plywood central girder and the transom fitted. Bottom stringers are added to stiffen the bottom area...