Paul Fisher

The Sealion was originally modelled on our Seafox sea kayak but the use of Cedar Strip planking for her construction allows a more graceful and curvaceous shape both for the hull and the deck. She is built over computer faired mould shapes set up on a...

A Strip Planked version of our most popular design - the Fisher Prospector Open canoe - plans include full-size templates for the moulds and the sail plan of the FP16. 15'8" Strip Planked Prospector Particulars LOA 15'8" 4.76m Beam 35" 0...

Many moons ago when I first started as a designer with McGruers on the Gareloch, I drew the lines of a 19' pocket cruiser for myself, partly as the day job was full of racing yachts - I never got to build her but the drawing was kept safe and would...

This is a modern ‘sit-on’ type kayak where the cockpits are essentially open and sealed from the remainder of the kayak. The areas around the cockpits are used for both storage and buoyancy.Construction uses 3 or 4mm plywood throughout and the stitch...

The YM Senior is a lovely little pocket cruiser design by the late Kenneth M. Gibbs. Ken Gibbs designed some lovely ply sailing boats many of which used to feature in the original Yachting Monthly magazine. I had much pleasure in sailing a Senior many...

These plans are for the steelwork only of a 17.45m (57') narrowboat. The plan set consists of 7 drawings covering Hull Construction, Hull Construction Details, Deck/cabin Construction, Deck/cabin construction details, Hull panel shapes, Rudder and engine...

This is a simply constructed miniature schooner for the sailing man who likes a classic sail plan. Normally, you would not find a schooner rig on any boat less than 30’ long and therefore less complicated rigs can be used. But if you like plenty of...

The Carrick open canoe was designed for Tyrone Boats specifically for sail racing. She is certainly fast but is also very handy when paddled. She has 5 planks per side giving her a nicely rounded shape with a wide waterline beam for plenty of stability...

I was asked to take the 15'€™ (4.58m) Outboard Motor Canoe design extend it to 18' and also add 2" (50mm) to the hull depth. This new design uses the same basic hull shape with it’s narrow flat bottom panel with 3 further panels added each side...

I have often been asked whether we had a traditional Thames or Oxbridge type punt in our design catalogue - now and American client has asked us to draw up a 20' (6.01m) example for simple stitch and tape construction. She has a beam of 3'10" (1.17m)...

For the Windsor slipper launch we have used the ply over frame method of construction using a modern framework of ply bulkheads and frames partly linked by fore and aft ply girders all set up to make sure that the builder starts with an accurate base...

A 21' x 7' bigger sister to the Power 1 design using the same easy construction method and having a similar double chine construction with a flat bottom panel simplifying her building and producing an easy planing hull form. The hull, seats and cabin...