Misc.

These top-quality leash plugs from NWS Surf Products are made in the Pacific Northwest using injection molding. The brass bar makes the suitable for saltwater. Surfboard and paddle-board builders will know about leash plugs as glassed-in attachment...

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

These heavy duty injection molded Nylon hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear.PartABCDEK6714157/8"5/8"15/16"1-3/16"9/16"

K081350A3/8in.B1/2 in.C1-3/8 in.Weight.01 lb.

Injection molded Nylon Two Hole: Part A B C D E Fastener SD-671421 7/8" 3/8" 1/2" 3/4" 5/8" #6RH One Hole: Part A B C D Fastener SD-671425 15/16" 7/16" 7/16" 5/8" #6RH

Injection Molded Polypropylene Fiberglass/Nylon These parts are used to manage shock cord on the decks of kayaks.Dimensions and specifics below Round Line Guide - K736530 A= 1.5" - B= 3/8"   Bungy Block -...

Replacement plug for SD-520010, SD-520020, and SD-520030

The fastener pads are flat topped to accept 3/16" pop rivets or pan head screws.316 Stainless Steel K081850A11/32 in.B11/32 in.C1-1/16 in.Fastener3/16" Pop RivetWeight.02 lb.

These stainless hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear. The picture below shows an example. Part A B C D E SD-671460 15/16" 3/4" 1/2" 1-1/4" 1/2"

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

For kayak deck applications especially for arranging bungy cords to retain gear. K736550 - Single Loop K736560 - Double Loop Part A B Fastener K736550 1-1/4" 1/2" #10 OH K736560 1-5/8" 1/2" #10 OH

Essential safety equipment, this high quality pump is great for Kayaks, and all small boats with sides less than 16 inches high. Part# A SPG GPM K737500 21" 10 6