Hardware

Ideal for larger boats See our pintle & gudgeon compatibility chart This set consists of two gudgeons, one short pin pintle, and one long pin pintle. There is no hold down included. All parts are stainless steel - Fits 1" or 1-3/8" thick rudder...

Recommended Tool for Raptor 15 Gauge Composite Nails The B17P.763 Finish Nailer drives RAPTOR® 15 gauge composite finish nails from 1/2" up to 2" lengths. It's magnesium body provides extreme power with an outstanding power-to-weight ratio...

These are exactly the same drip rings that the last double paddle you bought had. So if you lost or wore out those or you made a new paddle and need drip cups for it, here is your chance. Fits handles from 1-1/8" up.Part #ABWeightK7372901"7/16".20

Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift...

Stamped Stainless Steel Stamped stainless eyes. Both eyes made from 0.075" strap. Part Length Width Eye Width Hole dia. RL-311 2-1/4" 1/2" 3/4" 3/16" RL-313 1-1/2" 3/8" 3/8" 3/16"

Boom vang system for Potter 15 or 19. Includes Ronstan block, combo V-jam block, shackle, 2 eye straps, and proper length of polyester double braid.

Injection Molded Nylon/Chrome Plated Zinc. LED Fold Down All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: drawing is not proportional   Part # A B C D Fastener SD-400013 24" 1-7/8" 2-1/2" na #8FH

Injection Molded Nylon

Suits mast dia.s between 76mm-115mm (3"-4 1/2") 316 Stainless Used for terminating wire rigging Wt. 3.9oz - 110g

Conveniently mounted below the tiller - it's out of the way but easy to access. No knobs to turn, no friction to fight, nothing to strip out or snap off. The TillerClutch is made from anodized aluminum and stainless steel. Simple on/off lever is easy to...

Similar to the RL-260 camcleat but with a glass-filled flange base for surface mounting. Use four countersunk #8 wood or machine screws. Available with or without stainless steel fairlead/strap. Bolts are on 1-1/2" centers - works best with 7/16" line or...

Stainless Steel Pan Head, Phillips, SS 316 Machine Screws -  These are the most common sizes for the pintles, gudgeons and rudder assemblies for the boat kits that we sell. I have long kept a handful of these in my shop for various...