Hardware

Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10...

Grab some of these kits for your shop or your boat - or both. You never know when you will need an odd screw, nut or pin.

Viadana Camcleat #25.10Takes up to 5/16" rope or line Comes with manufacturer two-year warranty Material - Aluminum Min line size - 3mm / 1/8" Max line size - 8mm / 5/16" Hole Spacing - 27mm / 1 1/16" Hole Diameter - 4mm / 5/32" Max Working Load - 100 kg...

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.  

The label decals that come with our Sea-Dog Fuse/switch panels are not very comprehensive. This decal sheet has many more options. Here is a list of the tags:AC MAIN SHORE BILGE PUMP AIR COND. BOW LIGHT RUNNING LIGHTS HEATER COCKPIT LIGHTS CABIN LIGHTS...

5mm (3/16") dia. clevis pin, 76mm (3") long, 2 x 5mm (3/16") fixing holesUsed for terminating wire riggingGrade 316 stainless steel0.5 oz. - 15 g

Stamped 304 Stainless - Made in Denmark These shackles have many potential uses but their primary function is for use attaching sail slugs and slides to grommets. Part No. A B C Breaking Strength SD-140154 3/16" 1/2" 1-1/16" 2,640 lbs...

Plastic/Stamped 304 Stainless Steel - 12 Volt DC. We picked these out for a Rifleman that we were building. We love the retro look One pair includes one starboard (Green) and one port (Red). NOTE: Bulbs are NOT LED.   IMPORTANT INSTALLATION NOTE:...

Stainless SteelPart #OverallSlotThicknessMtg HoleRL-344-B2" x 1"1.04" x 0.135"0.060"0.165"RL-4453" x 1.25"2.070" x 0.250"0.090"0.165"RL-4203.5" x 0.878"2.070" x 0.250"0.060"0.200"

3/8" pins - 1-1/2" - 3" rudders These pintles come in several widths but only one pin length. There is no gudgeon included. All parts are stainless steel - Fits 1-1/2" through 3" thick rudders. (note: pintle tangs cannot be adjusted for width) For...

Die Cast Manganese Bronze.  Part Number A B SD-192027 3/16" 1-1/16" SD-192029 3/16" 1-1/8" SD-192038 1/4" 1-1/2" SD-192050 1/4" 2"   Tidmarsh Major sent us this picture of the horse he rigged on his Skat sailboat using one of...

Molded Nylon/Webbing Outfit your kayak with the SEA-LECT Designs Webbing Handle w/ Caps made from heavy duty webbing with a rubber cover; Remember...a wet and slippery kayak is much easier to handle, with a handle! ...