DPI Hidden Fastener Series Access Doors - Polar White
- SKU:
- DPI-DPH
Description
These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel.
The hidden fastener doors have predrilled mounting holes that are located on the inside part of the flange so that the fasteners are hidden when the door is closed.
Fasteners do not show when hatch is closed
All doors come with one or two easy to use latches to keep it tight against the neoprene seal.
| Basic measurements for Access Doors: | |||
| Hidden Fastener Door Series | |||
| Part# | Outside Dimensions |
Cut-Out | Inside Dimensions |
| DPH1115 | 11 x 15' | 7-1/2 x 11-1/2' | |
| DPH1119 | 11-1/4 x 19-1/4' | 7-1/2 x 15-1/2' | |
| DPH1317 | 13-1/4 x 18' | 9-1/4 x 14' | |
| DPH1323 | 13-1/8 x 22-7/8' | 9-1/2 x 19' | |
| DPH1620 | 17-1/8 x 21-1/2' | 13-1/8 x 17-1/2' | |
| DPH1624 | 17-1/8 x 25-1/8' | 13-1/3 x 21' | |
Related Products
DPI Flush Series Access Doors - Polar White
$50.99 - $129.99
These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel.
The standard...
DPI Cover Plates - Polar White
$6.99 - $8.99
Made from highly durable, UV-stabilized Polypropylene
These covers are designed to cover places that only need to be exposed once in a blue moon. You have to remove the 6 screws
DPI Screw-Down Deckplates - Polar White
$9.99 - $15.99
Made from highly durable, UV-stabilized Polypropylene
These deckplates open easily with a 90° turn. The top covers the entire flange including fasteners for a clean look.
On Sale
DPI Latch Replacement Kit
$14.00
These replacement latch kits for access doors from DPI Marine are for the DPF and DPH Series hatches only - they
DPI Pull-up Deckplates
$17.99 - $22.99
Easy-open round deck plates
If you are tired of fighting screw out or pry out deckplates, you may want to switch to these. Not only do these not stick, they have a handy locking handle built in to...
Pintle & Gudgeon Fastener Kits
$4.80 - $8.90
Stainless Steel
Pintles and Gudgeons should always be bolted on. Period. We resisted trying to make kits for all the different pintle and gudgeon sets we sell because there are so many different...
Deckplate Wood Screw Fastener Kits
$1.00
Stainless Steel
The kit you need will be determined by the material and the thickness of the material that you are mounting to. For wood - if the wood is at least 1/2" thick, wood screws are fine...
Deckplate Machine Screw Fastener Kits
$2.00
Stainless SteelThe kit you need will be determined by the thickness of the material that you are mounting to. For any material that is 3/8" (9mm) thick then we recommend 1" machine screws with nuts...