Hardware

See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener  

These glass-filled injection molded nylon hinges have a stainless steel pin and are practically indestructable. They are economical too. Use them for all interior and exterior applications on your boat - hatches, folding tables or seats, windows and much...

We got a special deal from Race-Lite folks on these handy little hooks. They have quite a few and gave us a big discount on them. They are one inch wide, about 1-3/4 inches long and made of 0.060" material. The holes accept #10 round head fasteners. Buy...

Sold as pairs. If you are really into rowing, you may want to consider moving up to these specially shaped Manganese Bronze Douglas Oarlocks. This lock will work with any of our premium brass sockets (see links at right). To get a perfect rowing stroke...

A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 6 #8 flat head fasteners.

Stainless Steel Rigging PinsThese rigging pins have many uses - from tabernacles or mast steps like the one directly below, to gudgeons like the picture farther down. These are currently 1/4" and 5/16" in diameter and range from 2 to 3-1/2 inches...

These utility oarlocks are good for beginners as they hold the blade in position. They will clamp onto a shaft from 1-1/4 to 1-3/4 inches in diameter without modification. Mild steel construction permits adjustment to accomodate just about any shaft size...

Injection molded polycarbonate - 12 Volt DC. LED All Around Lights are approved for USCG 2 NM (Colreg 2 mile). Part# A B C Fastener SD-400042 4-5/16" 1-1/8" 2-1/4" #12 RH  

Aluminum The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. These cleats were strongly recommended by Mike Storer. Click to view/download installation guides:  SD-002171 SD-002172

Injection molded nylon, these scuppers function as one-way valves to let water out of your boat but not back in. Feedback: Hi Sandra, Attached is the photo I promised of you of the scuppers installed on the Escargot canal boat I am building. They appear...

Stainless steel swivel. Strap is 0.06" by 3/8". 3/8"+ between tangs. 1-5/8" long over all.Takes 3/16" x 1/2" pin.

Watertight compression deck plates. Over the years of selling and using various deck plates and hatches we've discovered that very few are really watertight. Fortunately most of them are watertight enough—meaning they don't leak much, and not...