Hardware

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

These heavy duty injection molded Nylon hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear.PartABCDEK6714157/8"5/8"15/16"1-3/16"9/16"

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines Impact resistant, U.V. stablised Nylon Reference Imperial Metric Hole Ø 9/32 in. 7 mm Fastener Ø 5/32 in. 4...

More of a courtesy light than anything. This little LED lights amber and uses an incredibly small abount of electricity. Hook directly to 12 volt source to light the cabin of your little cruiser.  

These are the bottom hinges that screw directly into a coaming or deck to mount a bimini. The photo above shows the difference between top mount and side mount and how the end caps or inserts mount on the hinges.

1 x 4-piece-pole 1 x Magnet holder 1 x Navimount Vertical / 950 1 x Navimount Horizontal / 952 1 x Neoprene stowaway bag Size incl. neoprene stowaway bag: H = 36 mm, Dia. = 80 mm Weight (incl. neoprene stowaway bag): 550 g

RL-427 - slides on 7/8" sailtrack and has a thumbscrew to stop travel.Shown with boom furler option

Brace hooks are used instead of barber haulers, to hook in the windward spinnaker sheet after gybing.Stainless steel hookNeoprene pad

This is a very robust set of stainless steel rudder hardware. The vertical gudgeon that bolts against the transom is a full 1/8th (0.125) of an inch thick and 1.25" wide. The rudder gudgeons are made from 1" wide strap and are 3/32 (0.090)" thick. The...

Protect your spars These spar kits were inspired by the Oar Leather Kits that we get from Rodger Swanson at Swanson Boat Company. The leather in each kit is 5-6 oz. top grain, vegetable tanned cow hide. Marine tallow is included as the...

These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder...

Reefing Hook - Mount this hook under the Tack Shackle for quick reefing - hook the reef tack under this hook. The base is 1/8" thick and 1.5" x 0.75". The two hooks are made from 1/4" dia. round stock. The mounting hole is 1/4" dia. There is a little...