Hardware

Polypropylene oar collars will help protect your fine Shaw and Tenney's. Each set comes with a packet of brass nails. (note: will fit all of our oar locks EXCEPT the 2" galvanized ones.)

Aluminum/Nylon/Acetal A neat, compact alloy cleat. Manufactured from aluminium for light weight and durable performance. SD-002112 Mk2 has a silver stove enamel finish for a cost effective, high quality coating. Patented Keeper diverts the rope away from...

These stainless chainplates are used for both the Potter 15 and the Potter 19.

8mm (5/16") dia. clevis pin, 64mm (2 1/2") long, 1 x 9.5mm (3/8") fixing holeUsed for terminating wire riggingGrade 316 stainless steel1.4 oz. - 40 g

These glass-filled injection molded nylon hinges have a stainless steel pin and are practically indestructable. They are economical too. Use them for all interior and exterior applications on your boat - hatches, folding tables or seats, windows and much...

Nylon - 3 sizes - Easy to install, just slip over the headstay and twist 90° for a postitve lock. Each comes with a stainless screw for easy jib attachent. Can also be used for pennants or flags also. - Easy to install, just slip over the...

This set consists of two gudgeons, one short pin pintle, and one long pin pintle. There is no hold down included. All parts are stainless steel - Fits 3/4" or 1-3/8" thick rudder. (note: pintle tangs can be easily adjusted for rudders as much as 1/4"...

This Aluminum cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is easy to release is required. The Sailor's preferred choice for adjusting trapeze lines, for light...

Grab some of these kits for your shop or your boat - or both. You never know when you will need an odd screw, nut or pin.

Investment Cast 316 Stainless Steel.

These are very elegant brass side mount oarlock sockets. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. Not only are these premium sockets nicely finished but they come with nylon bushings. The...

These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 3/8" from the ends. Nominal lengths are not from hole centers but total overall length.