null

Motor Boats

  • 36' Hawfinch Wood Narrowboat Plans

    36' Hawfinch Wood Narrowboat Plans

    We have often been asked for a wood version of a steel narrowboat and here it is. Narrowboats were of course made from timber in the first part of the last century although then, they used heavy boards of Elm and Oak. This version uses several layers...

    $34.00 - $236.00
    Choose Options
  • Power 3 Plans

    Power 3 Plans

    Soon after our Power 2.2 left the drawing board, we were asked to extend it and produce a design which, in a compact form, could accommodate a large aft cabin with a central wheelhouse and forward dinette. So the beam has been increased to...

    $34.00 - $473.00
    Choose Options
  • Shetland 14 Workboat Plans

    Shetland 14 Workboat Plans

    This sturdy craft has been designed for a client in Scotland who wanted a rugged general purpose boat for fishing and diving in rough water. She may only be 14’ long, but she is for all that, a large boat and she incorporates both integral buoyancy...

    $101.00
    Choose Options
  • 36' Motor Yacht Plans

    36' Motor Yacht Plans

    The drawings for this 36' motor yacht consist of lines, offsets, layout and profile details. Construction drawings and details can be furnished to the client to suit whatever method of build he requires. For the discerning motor yachtsman wanting a...

    $371.00
    Choose Options
  • 24' Strip Planked Motor Yacht Plans

    24' Strip Planked Motor Yacht Plans

    This was a commission just for the computer generated and faired mould shapes and building jig details for a 24' x 8'6" motor yacht of traditional appearance. The concept is to have a forward cabin with 2 berths plus wc and galley and either a short...

    $135.00
    Choose Options
  • 15'1" Port Pegasus Plans

    15'1" Port Pegasus Plans

    The Port Pegasus is a clinker boat which may be used as a pure rowing boat or fitted with a small diesel (ie Farymann 7.5) as a small motor launch with classic appearance.   As a general purpose launch, she could be fitted out in a variety of...

    $27.00 - $162.00
    Choose Options
  • Power 1.3 Plans

    Power 1.3 Plans

    The Power 1.3 is a development of the original Power 1 design. In this case, we were asked to produce a simply built hull with more capacity and suitable for offshore and estuary conditions. We have retained the flat bottom section which eases and...

    $135.00
    Choose Options
  • 21' Ijssel Launch Plans

    21' Ijssel Launch Plans

    This launch has been designed for diesel propulsion (10-15 hp) but she can also take steam or electric propulsion. The layout drawn for her is a simple open thro' plan with no obstructing bulkheads but she could be fitted out in a variety of ways - a...

    $34.00 - $358.00
    Choose Options
  • Skellig 18 Plans

    Skellig 18 Plans

    The Skellig 18 is based on our Skellig 26 workboat/fishing boat. She has a double chined V bottom shape with generous beam making her a very stable working platform for all kinds of duties. The hull, with it's high volume and weight carrying capacity...

    $27.00 - $236.00
    Choose Options
  • 39' Chaffinch Narrow Boat Plans

    39' Chaffinch Narrow Boat Plans

    The Chaffinch is a trad sterned narrow boat - drawings give the computer faired and generated hull panel shapes and full details for steel construction. The steel work drawings give details for the FW tank, rudder, sterngear/engine installation and weed...

    $34.00 - $331.00
    Choose Options
  • Stour 23 Plans

    Stour 23 Plans

    The Stour 23 has a simple 'V' bottomed hull form giving an easily driven shape that is also faster to build. Construction starts with a simple arrangement of plywood frames and bulkheads slotted together on a plywood central girder. Chine stringers are...

    $34.00 - $338.00
    Choose Options
  • 50'/60' Pintail Motor Yachts Plans

    50'/60' Pintail Motor Yachts Plans

    We have construction details for the hulls only of two 1930's style motor yachts. The first, shown above has a LOD of 60' (18.3m), beam of 13'11" (4.24m), draft of 3'8" (1.10m) and displacement of 30 tons (30.4 tonnes) and uses a simple form of ply...

    $506.00
    Choose Options
  • 18' Henley Slipper Launch Plans

    18' Henley Slipper Launch Plans

    The plans for the 16' Henley Slipper Launch include the hull panel shapes for a single chine "V" bottomed version and we were simply asked to take this model and stretch it to 18' - however, instead of just developing the hull panels, we have completed a...

    $34.00 - $203.00
    Choose Options
  • 21' Taranto Runabout Plans

    21' Taranto Runabout Plans

    We have often been asked about the design of a more rakish runabout - built in much the same way as the Redshrike (a ply inner skin over frames covered with Mahogany veneer) but with more modern lines - and at last we have been asked to design one...

    $34.00 - $270.00
    Choose Options
  • 65' Teign Motor Barge Plans

    65' Teign Motor Barge Plans

    I have recently drawn up the steel work/construction drawing along with the frame and plate shapes for a steel multi-chine version of the 45' Teign Motor Barge. We can also send details for the rudder engine beds etc for the 45' version as guidance for...

    $270.00
    Choose Options
  • Power 1.2 Plans

    Power 1.2 Plans

    The Power 1.2 is a development of our Power 1 design. She has increased beam and the chine has been lowered to give a more stable shape so that her side decks can be used comfortably. The drawings give details for a cabin arrangement with 2 full length...

    $135.00
    Choose Options
  • Ruby 19 Plans

    Ruby 19 Plans

    The Ruby 19 is based on our Ruby 22 double chine plywood steam launch. In the case of the Ruby 19 a client wanted a shorter version of the 22 to be built in steel which meant widening and deepening her to take the steel weight. Having produced the...

    $27.00 - $257.00
    Choose Options
  • 16' Curlew Motor Punt Plans

    16' Curlew Motor Punt Plans

    This is a very simple stitch and tape design using 5 sheets of 9mm (3/8") ply with pre-shaped hull panels and transoms. With a beam of 4'6" and a mid depth of 16" she has plenty of room for fishing, camping or for family pic-nics.She may be rowed but is...

    $81.00
    Choose Options
  • Rufus 20 Plans

    Rufus 20 Plans

    The RUFUS 17 plans have included the hull panel and frame shapes for a 20' x 8' version which were requested as a modification. I have now taken the 20' details and added a full set of plans for this version including hull construction details, deck...

    $27.00 - $236.00
    Choose Options
  • 26' General Purpose Workboat Plans

    26' General Purpose Workboat Plans

    This is a general purpose 26' workboat with a beam of 8'4". Construction consists of pre-shaped ply bulkheads and girders which are slotted together. Chine girders are then fitted and the pre-shaped hull skin then applied. Details are shown for the...

    $34.00 - $162.00
    Choose Options
  • 23' Canal Cruiser Plans

    23' Canal Cruiser Plans

    This is a simple ply cruiser designed specifically for canal use on the UK's narrow canals. She uses simple ply on frame construction and she has parallel sections aft which mean that she can lengthened or shortened easily. The drawings are for the...

    $34.00 - $203.00
    Choose Options
  • Somerset 11 Houseboat Plans

    Somerset 11 Houseboat Plans

    This is a simple barge with flat bottom single chine shape and a "ramped" shaped bow and stern. Despite the fact that this is a 'static' boat, the hull has been drawn to give a tough basis for whatever top is required. the drawings give the details for a...

    $34.00 - $236.00
    Choose Options