Hardware

Sea-Dog® Stern Eyes come with adjustable finish nuts as compared to the crimped ring used on most other Stern Eyes. All parts are 304 stainless steel. Plate sizes: 2-1/4" x 3/4" (plate 1) 3-1/2" x 1-1/2" (plate 2) Part...

Stainless Steel (above)or Black (right) finish - 12 Volt DC. Now you don't have to worry about converting standard nav lights to LED. The LED's actually emit red or green light. This makes them much more effecient than putting white lights behind...

These are the bottom hinges that screw directly into a coaming or deck to mount a bimini. The photo above shows the difference between top mount and side mount and how the end caps or inserts mount on the hinges.

Similar to the RL-260 camcleat but with a glass-filled flange base for surface mounting. Use four countersunk #8 wood or machine screws. Available with or without stainless steel fairlead/strap. Bolts are on 1-1/2" centers - works best with 7/16" line or...

3/8" pins - 1" - 1-3/8" rudders These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 1" or 1-3/8" thick rudder. (note: pintle tangs can be easily adjusted for rudders...

These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS...

Recommended Tool for Raptor 18 Gauge Composite Brads The Omer 12P.25 Brad Nailer drives the full range of Raptor® B/18 18 gauge plastic brad nails from 7/16" (11mm) through 1" (25mm) lengths. The narrow nose allows for superior nail placement in hard...

Injection Molded Nylon/Chrome Plated Zinc. LED Removable All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: drawing is not proportional   Part # A B C D Fastener SD-400015 24-5/8" 18-1/2" 5/8" 2-7/8" #8FH

The Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof. Includes- two self tapping stainless steel screws Technical Specs Size: H...

A nylon cleat with a tooth design that offers a quick, positive lock that is easy to release. Works with line sizes 1/8" to 1/4" (3-6mm). The side entry fairlead allows the cleat to be hooked onto the line, without threading the rope through an eye,...

Injection molded nylon If you have read some of the articles in Duckworks about making your own Blocks (see links below), and want to try it, but are uncertain about making the sheaves, this may be what you need. These durable Nylon pulleys are also...

#10 through 3/4"