Powerboats

The 15' Sand Martin is a simple 'V' bottomed plywood runabout/fishing boat that will comfortably take three or four people and more if required.  Construction is stitch and tape using 6mm plywood. The 15' Sand Martin may be fitted out to suit the...

14ft 9-3/4in x 4ft 3-1/4in x 6in Flint was designed to meet the requirements of an experienced boatman who lived on an island several miles from the mainland. The boat had to row in a spirited fashion, and be able to cover long distances under the urge...

For those wanting a much bigger outboard motor canoe capable of having several fishing at once and which can also be used as a freight canoe on rivers and lakes, the 18' Outboard Motor Freight Canoe would certainly suit. She can take 6-8 adults or 4...

Length 2100mm ( 6`10 3/4” )Beam 1228 ( 4`1/4” ) Kompship is a ship for children's water games. The best motor are the legs or a wooden stick, but the ship can also be driven carefully with an trolling motor or with a small outboard...

Power skiff 4.8 m For Study Plan PDF, Click HERE Hull length / waterline 4.81m / 4.32 m     Breadth / waterline  1.80m / 1.40 m Outboard motor 4 to 20 hp Draught 0.18 m Design category / Crew C3 / D5 Light weight / with...

The Clyde 18 is a modified Power 1.3 Mk 1 design. The hull shape is a simple deadrise type, single chine 'V' bottomed. The hull is parallel sectioned aft of the wheelhouse which means that she can be easily lengthened or shortened. Construction is for...

Below are photos of Tim Thedon's Jarvis 21 under construction.               21' Jarvis Particulars LOA 21'4" 6.52m Beam (excl. gunwale rubbers) 7'9"" 2.35m Hull Mid Depth 3'4" 1...

This is the last of the “bevel bottom” hulls that I will design. There are four of them now, and that should be enough. With the Green River, Cedar River, Naselle River, and now the James Boat designs. Each of the hulls in the...

Note: Full size patterns are available for these plans HERE Bigger - Better - More Stable The new Unicat 2.8. You asked for it and it's finally here. This is not just a lengthened 2.4, it's a completely new hull, designed from the ground up with more...

This hull is spin off of another hull I was working on over the winter. That hull, the Green River Drifter was a variation on my drifter hulls with a “beveled” chine panel on the lower sides, but still had a single piece bow and stern panel...

The concept for The SWAN BOAT was inspired by Sharon Torregrosa, who designed & built her own Swan motif boat. This portable version includes an ample beam, good freeboard, generous internal volume and multi-seating. It is sturdy, easy to build,...

For Autocanoe printed plans, click HERE. You’ve seen the struggle; a man on boat ramp untying straps, bracing for impact, trying to control the slide of the unwieldy canoe that is precariously close to falling off the roof of...