Hardware

We got a special deal from Race-Lite folks on these handy little hooks. They have quite a few and gave us a big discount on them. They are one inch wide, about 1-3/4 inches long and made of 0.060" material. The holes accept #10 round head fasteners. Buy...

These utility oarlocks are good for beginners as they hold the blade in position. They will clamp onto a shaft from 1-1/4 to 1-3/4 inches in diameter without modification. Mild steel construction permits adjustment to accomodate just about any shaft size...

Injection molded nylon, these scuppers function as one-way valves to let water out of your boat but not back in. Feedback: Hi Sandra, Attached is the photo I promised of you of the scuppers installed on the Escargot canal boat I am building. They appear...

Stainless steel swivel. Strap is 0.06" by 3/8". 3/8"+ between tangs. 1-5/8" long over all.Takes 3/16" x 1/2" pin.

These halyard shackles have a lever action for easy opening and closing, with a keyed pin for positive locking.Grade 316 stainless steel bodies and pins ReferenceImperialMetricA3/16 in.4.8 mmB7/8 in.22.0 mmC13/32 in.10.5 mmD19/32 in.15.0 mmP.L. B.L.1980...

The Navimount RAIL is designed to attach the Navilights with Magnetic base, Navimount base or Suction base to any 25 or 35 mm / 1" or 1-¼" rail. Technical Specs Size: H = 67 mm, Dia. = 65 mm Weight: 120 g Model Name: Navimount RAIL Model Nr.:...

By popular request we are finally offering one inch nylon webbing and buckles. Since these are sturdy and not really affected by water, they are very useful for many applications on a boat. Some ideas: Keeping hatches closed Holding heavy gear in...

RL-336 - Spring TypeStainless Steel spring rudder hold-down - 4" long x 3/4" wide - may be used with any of our pintles and gudgeons. RL-337 - Swivel TypeStainless Steel swivel hold-down - 1" long x 5/8" wide - may be used with any of our pintles and...

Note: size = pin diameter Forged 316 Stainless Part No. A B C Breaking Strength SD-147403 5/32" 5/16" 1-1/4" 1540 lbs SD-147404 3/16" 3/8" 1" 2,200 lbs SD-147406 1/4" 1/2" 1-1/4" 3,300...

Injection molded Nylon Two Hole: Part A B C D E Fastener SD-671421 7/8" 3/8" 1/2" 3/4" 5/8" #6RH One Hole: Part A B C D Fastener SD-671425 15/16" 7/16" 7/16" 5/8" #6RH

  Injection molded nylon pad eyes can be used for a multitude of applications. UV stabilized and corrosion resistant they install with two #8 FH fasteners (not included). Black

Use with RL-301-A or RL-301-B or RL-305-A or RL-305-B blocks. Takes #10 screws. Weight 1/3 oz.