MSRP:
Now:
$3.15 - $6.31
Was:
— You save
Description
Stainless Steel
View AllClose
The stainless plates are 1-1/2" x 3" x 0.062" with 3/16" mounting holes. The curved ones are intended for a boom that is 2-3 inches in diameter.
The stainless cables are 1/8" diameter x 6" long. The diameter of the button is 5/16"
Related Products

Racelite Stainless Chain Plates
MSRP:
Now:
$2.99 - $6.99
Was:
Stainless Steel
Chainplates transfer the stress from standing rigging down into the hull. They may also have other uses for all kinds of applications. Use your imagination. Premium stainless steel...

Racelite Stainless Exit Plates
MSRP:
Now:
$6.27 - $11.33
Was:
Stamped stainless steel
For use where a line or wire has to pass through a deck or spar
Both plates are 1-1/4" x 2" x 1/16" thick. There are four holes for #8 f

Racelite Chain Plate Covers
MSRP:
Now:
$2.74 - $4.47
Was:
Stainless SteelPart #OverallSlotThicknessMtg HoleRL-344-B

Racelite Deck Plate
MSRP:
Now:
$5.00
Was:
This stainless steel deck plate can be used with our RL-349

Clamcleat Trapeze & Vang Cleats
MSRP:
Now:
$18.99
Was:
This Aluminum cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is easy to release is required. The Sailor's...
Customers Also Viewed

Boom Vang System for Potter 15 and 19
MSRP:
Now:
$95.00
Was:
Boom vang system for Potter 15 or 19. Includes Ronstan block, combo V-jam block, shackle, 2 eye straps, and proper length of polyester double braid.

Boom Bails and Hangers
MSRP:
Now:
$2.99 - $18.99
Was:
Lots of different sizes
RL-333
Racelite Stainless boom bail is 1-1/8" wide but could be bent down to 1" or up to 1-1/2"...

Forestay Tensioning Lever
MSRP:
Now:
$75.00
Was:
Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many...

Racelite Stainless Chain Plates
MSRP:
Now:
$2.99 - $6.99
Was:
Stainless Steel
Chainplates transfer the stress from standing rigging down into the hull. They may also have other uses for all kinds of applications. Use your imagination. Premium stainless steel...

Small 7 Hole Quick-Release Shroud Levers
MSRP:
Now:
$37.50
Was:
Adjust and tension dinghy rigging with the ease of a lever.
C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for...

Viadana 4 to 1 Boom Vang/Mainsheet
MSRP:
Now:
$139.00
Was:
Viadana 4 to 1 Boom Vang. Ideal for mid-sized trailersailers like Catalina 22s and Com-Pac 23s. This high-quality hardware package includes all blocks and 40 feet of pre spliced 3/8" line. Would also...


Ronstan Roller Furling Gear
MSRP:
Now:
$76.99 - $309.99
Was:
Two furlers available & swivels
RF76
Ronstan Above Deck Jib Furler
SS ball bearing swivel unit. Fork & fork take-off with 6.4 mm (1/4") diameter Pins. Overall height 80 mm (3...

5/16" (8mm) Ronstan Fiddle, V-jam Cleat, Tube Rivet Head Utility Block
MSRP:
Now:
$33.99
Was:
Features:
Lightweight durable construction
Economical
Maintenance free
Allows fast, sure cleating of control lines.
316 Stainless steel cheeks and UV stabilised Acetal sheaves ensure a long service...

Racelite Formed Tangs (Hounds)
MSRP:
Now:
$10.99
Was:
Two of these stainless formed tangs constitutes a hound. The ones in the photo above are held together by a twist tie to show how they would be aligned in practice.
Part No.
Mast...

Weekender Vertical Gudgeon
MSRP:
Now:
$13.80
Was:
These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically...