MSRP:
Now:
$6.27 - $11.33
Was:
— You save
Description
Stamped stainless steel
For use where a line or wire has to pass through a deck or spar
Both plates are 1-1/4" x 2" x 1/16" thick. There are four holes for #8 fasteners and they will pass up to a 3/8" line, wire or rod. The RL-255C is curved to mount on a spar or curved surface while the RL-255F is flat.
Related Products

Racelite Stainless Chain Plates
MSRP:
Now:
$2.99 - $6.99
Was:
Stainless Steel
Chainplates transfer the stress from standing rigging down into the hull. They may also have other uses for all kinds of applications. Use your imagination. Premium stainless steel...

Racelite Vang Plates
MSRP:
Now:
$3.15 - $6.31
Was:
Stainless SteelThe stainless plates are 1-1/2" x 3" x 0.062" with 3/16" mounting holes. The curved ones are intended for a boom that is 2-3 inches in diameter.

Racelite Deck Plate
MSRP:
Now:
$5.00
Was:
This stainless steel deck plate can be used with our RL-349

Racelite Chain Plate Covers
MSRP:
Now:
$2.74 - $4.47
Was:
Stainless SteelPart #OverallSlotThicknessMtg HoleRL-344-B

Racelite Stainless Shroud Adjusters
MSRP:
Now:
$8.89 - $9.73
Was:
Stainless steel - two sizes
For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings.
Dimensions:
Customers Also Viewed

Racelite Stainless Shroud Adjusters
MSRP:
Now:
$8.89 - $9.73
Was:
Stainless steel - two sizes
For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings.
Dimensions:
Part
Length
Width
Hole dia.
Strap...

Forestay Tensioning Lever
MSRP:
Now:
$75.00
Was:
Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many...

Racelite Nylon Through-Deck Fairleads
MSRP:
Now:
$3.01
Was:
Two sizes
Use through deck fairleaders for easy and frictionless halyard entry. Large size (RL 42) fits 1" hole, is 5/8" long, and for 3/8" rope. Small size (RL 49) fits 5/8" hole, is 1/2" long, and...

TillerClutch
MSRP:
Now:
$84.95
Was:
Conveniently mounted below the tiller - it's out of the way but easy to access. No knobs to turn, no friction to fight, nothing to strip out or snap off. The TillerClutch is made from anodized...

Double Action Air Pump
MSRP:
Now:
$21.99
Was:
These pumps come with three different nozzles and are designed to fill everything from inflatable boats to air mattresses, but we stock them primarily for inflating our popular Beach...

Small 7 Hole Quick-Release Shroud Levers
MSRP:
Now:
$37.50
Was:
Adjust and tension dinghy rigging with the ease of a lever.
C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for...

Viadana Double Ball Bearing Block 38mm
MSRP:
Now:
$33.99
Was:
These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave...

1/4" (6mm) Garhauer Cheek Block/Deck Organizer
MSRP:
Now:
$17.95
Was:
Garhauer Component Block. Aluminum block will handle up to ¼" line. Good as cheek block or organizer and is commonly used on centerboards. Factory block for the West Wight Potter 19 centerboard...

Racelite Small Stem Fitting
MSRP:
Now:
$14.24
Was:
Built with a stem for extra strength. Base 3" long by 1.5" wide tapering to 5/8". Stem is 4" long, 5/8" wide & 0.085" thick w/ 3 1/4" holes. Takes up to 6 #10 screws. Fin has two 1/4" holes and one...