Dinghies

13’x 6’x 8‘‘(2’9’’ with board down). A miniature cat boat of traditional design given modern construction techniques. Using the stitch and tape method with pre-shaped ply hull panels weight, cost and building...

Based upon the American Adironack guide boat, this craft combines traditional lapstrake (clinker) construction with modern materials. The bottom is a flat piece of 3/8’’ ply slightly rockered fore and aft and the five strakes are of...

This design is a 15' version of the 17 footer - the beam is the same at 45" and she has a single traditional oarlock. She uses just 5 sheets of 4, 5 or 6mm plywood and the plans give details so that she can be made in 2 halves split at the centre seat...

The design for the Surf 8 started with the need for a small dinghy that would have pretensions to be a small multi role dayboat - an excellent sailing craft, motor boat and still be easily car toppable. Taking the Skylark...

The Hartford 18' skiff was drawn up for the Great River Race and to take a crew of 4 - a cox, 2 oarsmen plus a passenger who could take a turn at rowing. She has 5 planks per side and is built using the stitch and tape method for the shortest...

This is a beautiful double ender for simplified strip plank and epoxy construction. Temporary moulds are set up with pre-shaped stem, stern post and hog and then the boat is planked with thin strips of Cedar glued edge to edge with epoxy giving a...

This is a very simple 11’6’’x5’ ‘V’ bottomed dinghy for general purpose use. Her ‘V’ bottom and 5’ beam gives her both stability and a good turn of speed under both oars and sails. She can be built as...

The Greenshank is a pram version of the Redshank and has a length of 7’6’’ and a beam of 4’. The pram bow gives more space forward for stowing gear or for transporting crew out to your yacht. She is an ideal fishing dinghy...

The Mandarin 17 has a beam of 45” and is designed with traditional oarlocks to mirror the traditional Thames skiffs. She may be fitted with a single or double rowing position and the plans detail a rudder and traditional foot rests. She uses 5 to 6...

This skiff has been drawn up for a client who specifically wanted to develop a design optimised for the “front rower” rowing system (www.frontrower.com) which allows the rower to face forward. For those who do not want to use this system we have...

Cobles take many different forms—this is a very different type to that found on the NE Coast of England which are used in the sea off exposed shorelines—this coble is of a type found on rivers and inlands waters and was used for rod fishing—mainly...

The Redshank is a beautiful traditional English stem dinghy. Her length is 7’6’’ and she has a beam of 4’ making her a very roomy dinghy for her size. Full-size mould shapes are given so that she may be made by the purist...