Paddleboat Hardware

SEA-DOG's new pivoting pedal foot brace system is designed with the same strength and stiffness as our adjustable foot brace version, which has been an industry standard retro-fit for years. By using the same track, adjustment rods and clamps it is now...

Replacement plug for SD-520010, SD-520020, and SD-520030

The fastener pads are flat topped to accept 3/16" pop rivets or pan head screws.316 Stainless Steel K081850A11/32 in.B11/32 in.C1-1/16 in.Fastener3/16" Pop RivetWeight.02 lb.

These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline...

Black Nylon rudder cable tubing. 3/16" OD. This is the same material used in the SeaLect Rigging Kit - which has 2 - 15 foot pieces. If you need more than that you can order it by the foot. Typically used with 1/16" Stainless cable.  

These stainless hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear. The picture below shows an example. Part A B C D E SD-671460 15/16" 3/4" 1/2" 1-1/4" 1/2"

These are absolutely the best kayak footbraces we have ever seen. They are resistant to any of the things you might run into including water, sand, fish scales, sunlight - nothing will stop these footbraces from working properly. The pedal is molded...

SEA-LECT Designs Kayak Recreational Footbraces are designed to be maintenance free with tremendous strength - at a price that's attractive to everyone! With three attachment options and low profile pedal that mounts easily in most boats, this footbrace...

For replacements or new boat constructionNot sure which hatch fits your production boat? Click here for a partial list of manufacturers and hatch part numbers. Part# Outside edge of raised mounting ring Max Size * Minimum...

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

When you don't want to mount your footbraces by drilling a hole through your kayak, simply fiberglass or glue on studs to act as the mounting bracket. This kit includes four studs, four clamps, four nylock nuts and two cable adjuster clamps. This kit...

Tension Adjuster (circled) K747260 If you own a pair Sea-Lect Rudder Control Foot Braces but somehow did not get the tension adjusters that we provide or if they have been damaged somehow, these are OEM replacements.