SeaLect Nylon Pad Eye

  Injection molded nylon pad eyes can be used for a multitude of applications. UV stabilized and corrosion resistant they install with two #8 FH fasteners (not included). Black

Seadog Stainless Snap Handle Drain Plug

These commonly seen snap handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any reasonably smooth 1" hole in a transom or other location will work. You can install a...

Seadog Stainless Hatch Spring

This clever device is used for holding hatches open. You simply lift the hatch cover and let go. The spring snaps straight and holds the lid up without any effort on your part. To close the hatch, simply bend the spring into a "U" shape while closing...

Seadog Stainless Eye & Jaw Swivels

Note: size = diameter of pin Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment cast 316 stainless steel these jaw to jaw swivels are...

Seadog Deluxe Lift Handle

A very nice cast brass handle. Similar to the Sea-Dog Heavy Duty Lift Handle but slightly lighter and less expensive.   Part # A B C D E F Fastener SD-222349 6" 3-13/16" 1-1/16" 1-5/16" 3/4" 5" #10 FH

1-1/2" Cast Brass Take Apart Butt Hinges

Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges...

Seadog Nylon Angled Oarlock Socket

Injection Molded Nylon. The reason we are offering these singly rather than as a pair is that they would be ideal, I think, to mount on a transom for a sculling oar. The socket is heavily built and quite strong. It will work with any of the oarlocks we...

Seadog 10" Floating Winch Handle

All new, patent pending design is made by way of air assist injection molding instead of foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load...

Angled Top Mount Bimini Deck Hinges

These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and...

Seadog Hatch Adjusters, twist type

These hatch adjusters are made from 304 stainless steel and glass filled Nylon. They telescope to open or close hatches, windows, shelves, or tables and are held in place by twisting the collar. Ends swivel 360 degrees for any installation. Here are...

Seadog Illuminated 6 Fuse/Switch Panels

Fire Resistant Injection Molded Nylon/with Illuminating Switches Panel rating: 12 volt, 37 amps total. Individual circuit: 10 amps maximum. Meets CE specifications. All panels take standard glass fuses. To customize panel to your specific setup,...

Seadog Adjustable Oar Collars-pair

Polypropylene oar collars will help protect your fine Shaw and Tenney's. Each set comes with a packet of brass nails. (note: will fit all of our oar locks EXCEPT the 2" galvanized ones.)

Clamcleat Racing Junior Mk2 & Keeper

Aluminum/Nylon/Acetal A neat, compact alloy cleat. Manufactured from aluminium for light weight and durable performance. SD-002112 Mk2 has a silver stove enamel finish for a cost effective, high quality coating. Patented Keeper diverts the rope away from...

Nylon Butt Hinges

These glass-filled injection molded nylon hinges have a stainless steel pin and are practically indestructable. They are economical too. Use them for all interior and exterior applications on your boat - hatches, folding tables or seats, windows and much...

Seadog LED Round Transom Light

Plastic/Stamped 304 Stainless Steel - 12 Volt DC. This LED transom light is approved for USCG 2 NM (Colreg 2 mile). Part# A B C D Fastener SD-400060 3-3/16" 1-3/8" 5/16" 2-1/2" #12FH

Clamcleat Trapeze & Vang Cleats

This Aluminum cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is easy to release is required. The Sailor's preferred choice for adjusting trapeze lines, for light...

Seadog Stainless Trigger Snap

Investment Cast 316 Stainless Steel.

Seadog Premium Brass Side Mount Oarlock Sockets

These are very elegant brass side mount oarlock sockets. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. Not only are these premium sockets nicely finished but they come with nylon bushings. The...

SeaDog Telescoping Boat Hook

Sea-Dog® boat hooks are constructed of marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Add in a four-point hook attachment from a over-molded soft rubber coated hook, that protects your boat from scuffs and...

Seadog Replacement Drain Plug

Replacement plug for SD-520010, SD-520020, and SD-520030

Bimini Locking Slide Hinges

Injection molded Nylon These are the bottom hinges that go into an aluminum track and have a built in lock to hold everything in place. They come port and starboard.

Auto-Release Clamcleats

Aluminum & Acetal This exciting new cleat will release a line when a set load is exceeded. It's perfect for a hold down for pivoting rudders and leeboards! The cleat flips up to release the rope when a set load is exceeded. The SD002570 is easily...

Seadog Cast Brass Strap Eye

These polished cast brass pad eyes can be used for a variety of applications both decorative and functional. Great for block attachment, controlling lead lines, or creating tie down points. Installs with two #8 FH fasteners (not included). Part...

Seadog Stainless Fixed Eye Snap Shackle

Investment Cast Stainless Steel. This is also the factory West Wight Potter halyard shackle. Part Number A B C D SD-143520 2-1/4" 3/8" 9/19" 3/8"

Seadog Heavy Duty Nylon Cleats

Heavy duty black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4.5, & 6.25" sizes

Seadog Stainless Swivel Eye Boat Snap

Investment Cast 316 Stainless Steel. Part Number A B C SD-146131 3-5/16" 7/16" 3/4"

Sea-Lect Screw Out Deck Plates with Internal Collar

These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline...

Seadog Stainless Steel Rings

Various sizes, Formed 304 Stainless Steel Part...

Heavy Duty Stainless Swivel Hasp

A high quality, heavy duty stamped 304 Stainless Steel swivel hasp. Takes #8 flat head fasteners.

Concave Rail Mount Deck Hinges

This hinge is used to mount a bimini to a standard 7/8" rail. It connects to any of our end caps or inserts.

Seadog 4" Open Base Die Cast Cleat

These die cast chrome plated cleats are interchangeable with Perko® style 1210 cleats. Complete w/ galvanized studs, washers and nuts threaded into each leg of the cleat. This eliminates the need for fasteners and provides a clean looking installation...

Seadog Stern Eyes

Sea-Dog® Stern Eyes come with adjustable finish nuts as compared to the crimped ring used on most other Stern Eyes. All parts are 304 stainless steel. Plate sizes: 2-1/4" x 3/4" (plate 1) 3-1/2" x 1-1/2" (plate 2) Part...

Seadog LED Port and Starboard Navigation Lights

Stainless Steel (above)or Black (right) finish - 12 Volt DC. Now you don't have to worry about converting standard nav lights to LED. The LED's actually emit red or green light. This makes them much more effecient than putting white lights behind...

Seadog Removable LED All Around Light

Injection Molded Nylon/Chrome Plated Zinc. LED Removable All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: drawing is not proportional   Part # A B C D Fastener SD-400015 24-5/8" 18-1/2" 5/8" 2-7/8" #8FH

Loop Clamcleats

A nylon cleat with a tooth design that offers a quick, positive lock that is easy to release. Works with line sizes 1/8" to 1/4" (3-6mm). The side entry fairlead allows the cleat to be hooked onto the line, without threading the rope through an eye,...

Cast Brass Heavy Duty Lift Handles

Once in a while you get something in the mail that is actually more robust than you had hoped rather than the other way around. That is the case with these handles. They weigh almost half a pound apiece. Solid cast brass, the SD-222356 has a polished...

Nylon Lateral Clamcleats

Injection molded Nylon Sea-Dog Nylon lateral clamcleats - mount on either side of a centerboard case, on gunwales, coaming, or other vertical surface.

Seadog Stainless Bow Chocks, pair

Keep anchor or dock lines from chafing gunwale or other parts of your boat. Investment Cast 316 Stainless - these are hefty, high quality parts. They will look good on any boat.Part#ABCDFastenerSD-0600404-3/4"13/16"1/2"3-5/16"#10FH

Seadog Illuminated 4 Fuse/Switch Panels

Fire Resistant Injection Molded Nylon/with Illuminating Switches Panel rating: 12 volt, 37 amps total. Individual circuit: 10 amps maximum. Meets CE specifications. All panels take standard glass fuses. To customize panel to your specific setup,...

Seadog Galvanized Iron Cleats

Cast Iron, Hot dip galvanized Part# A B C D Fastener SD-040103 3.5" 1" 13/16" 1-5/8" #8FH SD-040104 4' 1-1/8" 7/8" 1-7/8" #10FH SD-040105 5" 1-5/16" 1-1/16" 2-3/16" #12FH SD-040106 6" 1-3/8" 1-1/4" 2-3/16" 1/4"

Seadog Bakelite Terminal Blocks

Stamped Brass/Molded Bakelite/10 Amps terminals Part # Terms. A B C D E Fastener SD-426604 4 7/8" 11/16" 2-3/16" 1/4" 7/16" #4 RH SD-426608 8 7/8" 11/16" 3-11/16" 1/4" 7/16" #4 RH   Stamped Brass/Molded Bakelite/20 Amps...

Clamcleat Aluminum Boom Cleat & Keeper

Aluminum/Nylon/Acetal Anodized Aluminum - These cleats can be mounted flat or on a curved surface such as a boom (see illustration at bottom of page). Aluminum construction means these cleats will stand up to more use and abuse than Nylon cleats will...

Seadog Bronze and Stainless Pelican Hooks

Bronze or Stainless Quick release for rope or cable such as lifelines. Lately these have become popular for belts. Part No. A B C D SD-189780 4" 1/2" 3/8" 9/16" SD-189785 4" 1/2" 3/8" 9/16"

Seadog Universal Kill Switch

Stamped Brass/Injection Molded Nylon & Delrin Replace lanyard if worn, cut or frayed. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application.WARNING: Test switch for proper function before...

Seadog Dual Battery Switch

Machined Brass/Injection Molded Nylon This is a typical two battery switch. It is handy for any boat with two batteries - usually where one is a starter battery and the other is a deep cycle battery for lights. Switch to "1" to start, to "ALL" to charge...

Nylon Door Hinges

These glass-filled injection molded nylon hinges have a stainless steel pin and are practically indestructable. They are economical too. Use them for all interior and exterior applications on your boat - hatches, folding tables or seats, windows and much...

Seadog Premium Brass Round Oarlocks

Sold as pairs. Sand cast brass These are very elegant round oarlocks. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. The alloy is an engineered high class brass for increased durability and corrosion...

Seadog Nylon Flange Type Screw-in Drain Plug 1

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

Seadog Stainless Steel Cleats

Herreshoff style Stainless Steel tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4, 5, 6, & 8 inch sizes.(Note: the Potter factory specifies the 6" SeaDog Stainless Cleat for its 15 & 19 foot...

Seadog Galvanized Angle Mount Oarlock Sockets

Sold as pairs. These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive.