RaceLite

Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for...

Stainless steel - two sizes For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings. Dimensions: Part Length Width Hole dia. Strap thickness RL-245S 5-1/2" 5/8" 0.264" 0...

Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws.

This stainless steel deck plate can be used with our RL-349 shroud adjuster or RL-305-A or RL-205 blocks. It comes complete with clevis pin and ring. wt 1/2 oz.

RL-425-H - RL-325-H Hounds are what you bolt to a mast to attach a wire stay to. These Race-Lite hounds are the ones made for various boat manufacturers. They are strong and solid. Part No. Mast Size Strap Hole...

Reefing Hook - Mount this hook under the Tack Shackle for quick reefing - hook the reef tack under this hook. The base is 1/8" thick and 1.5" x 0.75". The two hooks are made from 1/4" dia. round stock. The mounting hole is 1/4" dia. There is a little...

Built with a stem for extra strength. Base 3" long by 1.5" wide tapering to 5/8". Stem is 4" long, 5/8" wide & 0.085" thick w/ 3 1/4" holes. Takes up to 6 #10 screws. Fin has two 1/4" holes and one 3/8" hole. All stainless steel construction.

For travelers, jibs, sliding stays, etc. 1/4" diameter ring. 5/8" x 3/4" opening. Slide length 3" with thumbscrew for easy adjustment. Stainless steel construction. Fits 5/8" sailtrack.

Made of spring stainless steel, these retainers are used on Sunfish and many other production sailboats to keep the daggerboard down yet allow it to be easily withdrawn. Length Width Thick 6" 3/4" 0.020"

For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of...

Stainless hook holds pole diameters to 1-1/2". Takes #8 oval head screws.

See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener