Racelite Moveable Goosenecks For 5/8" Sailtrack

RL-327 - slides on 5/8" sailtrack and has a thumbscrew to stop travel.Shown with tangs

Racelite Deck-Plate

This stainless steel deck plate can be used with our RL-305-B blocks. Takes #8 RH screws. Base 2-1/2" long. Stainless steel. You may need a 5/8" x 3/16" Clevis Pin

Racelite 1/2" Stainless Tangs

Stainless Steel These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 1/2" from the ends. Nominal lengths are not from hole centers but total overall length.

Racelite Extra Heavy Duty Pintles -

3/8" pins - 3 different options These pintles are somewhat adjustable like the Racelite 300 series pintles but heavier. You would probably want to use the narrow pintles with a metal rudder. These have a single pin length option and nominally fit a 7/16"...

Racelite Medium Duty Gudgeons

Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10...

Racelite Chain Plate Covers

Stainless SteelPart #OverallSlotThicknessMtg HoleRL-344-B2" x 1"1.04" x 0.135"0.060"0.165"RL-4453" x 1.25"2.070" x 0.250"0.090"0.165"RL-4203.5" x 0.878"2.070" x 0.250"0.060"0.200"

Racelite Extra Heavy Duty Pintles

3/8" pins - 1-1/2" - 3" rudders These pintles come in several widths but only one pin length. There is no gudgeon included. All parts are stainless steel - Fits 1-1/2" through 3" thick rudders. (note: pintle tangs cannot be adjusted for width) For...

Racelite Stem Fitting

All Stainless heliarc welded construction for extra strength. 3-1/4" long by 1-1/2" wide, tapering to 5/8" at ends. Holes take # 10 flat head screws or bolts. Fin is 2-1/2" long & 1/8" thick with (2) 1/4" holes and (1) 3/8" hole. 

Racelite Stainless Spin Strap

The RL-318 Spin Strap from Racelite is used to connect a block to a spar or just about anywhere else. Use with block RL-305-A or RL-205. Takes #10 screws. Weighs 1/3 oz. Here it is used to attach an RL-205 to the top of the mast on our Ladybug sailboat.

Set of Extra Heavy Duty Pintles and Gudgeons

See our pintle & gudgeon compatibility chart This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel - Fits 1-1/2" through 3" thick rudders. (note: pintle tangs cannot be adjusted for rudder...

Racelite Vang Plates

Stainless SteelThe stainless plates are 1-1/2" x 3" x 0.062" with 3/16" mounting holes. The curved ones are intended for a boom that is 2-3 inches in diameter.The stainless cables are 1/8" diameter x 6" long. The diameter of the button is 5/16"

Racelite Fixed Goosenecks

RL-150-C - This is a custom gooseneck made for a Cape Cod Frosty but would work on any boat with a 1-1/4" dia mast. Shown with 1/4" boom pin

Set of Light Duty Pintles and One Piece Gudgeon

Stainless Steel See our pintle & gudgeon compatibility chart This set consists of one gudgeon, one short pin pintle, and one long pin pintle. There is no hold down included. All parts are stainless steel - Fits 3/4" or 1-3/16" thick rudder. (note:...

Set of 1/2" Pin Heavy Duty Pintles and Gudgeons

See our pintle & gudgeon compatibility chart

Racelite Small Stainless Shackles

Stainless Steel  

Racelite Heavy Duty Gudgeons

Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10...

Racelite Halyard Shackles

Stainless Steel Light, fast, positive. No cotter pins, New spring tension captive pin maintains steady pressure on sides of shackle undersailing conditions, and allows easier opening for quick release. Stainless steel spring.

Set of Heavy Duty Pintles and Gudgeons

Ideal for larger boats See our pintle & gudgeon compatibility chart This set consists of two gudgeons, one short pin pintle, and one long pin pintle. There is no hold down included. All parts are stainless steel - Fits 1" or 1-3/8" thick rudder...

Racelite Stainless Eyes

Stamped Stainless Steel Stamped stainless eyes. Both eyes made from 0.075" strap. Part Length Width Eye Width Hole dia. RL-311 2-1/4" 1/2" 3/4" 3/16" RL-313 1-1/2" 3/8" 3/8" 3/16"

Racelite RL-261-S Camcleat

Similar to the RL-260 camcleat but with a glass-filled flange base for surface mounting. Use four countersunk #8 wood or machine screws. Available with or without stainless steel fairlead/strap. Bolts are on 1-1/2" centers - works best with 7/16" line or...

1/4" (6mm) Racelite Swivel Shackle Block

Small and compact, the RL-200 series blocks have one-piece Stainless Steel shells 1/16" thick. Smooth running Nylon sheaves, 7/8" diameter, accommodate up to 5/16" rope. The finest in running gear for the many smaller boats that require quality hardware...

1/4" (6mm) Racelite Block/Cleat combination

D-100AL with Aluminum Clamcleat For years we have been looking for a source for a quality block/cleat combination that does not cost an arm and a leg. There are a number of cheap ones that use a notched piece of stainless for a cleat, but that...

1/4" (6mm) Racelite Traveler Rig

Small and compact, the RL-200 series blocks have one-piece Stainless Steel shells 1/16" thick. Smooth running Nylon sheaves, 7/8" diameter, accommodate up to 5/16" rope. The finest in running gear for the many smaller boats that require quality hardware...

1/4" (6mm) Bronze Fast Eye Pulleys

These bronze blocks are so salty they'll make your eyes burn. Use them to add a touch of class to your boat.Cat No.PH3-3Rope Dia.1/4"Sheave Dia.1"Sheave Width3/8Eye Dia.3/8"

1/4" (6mm) Racelite Swivel Eye Block

Small and compact, the RL-200 series blocks have one-piece Stainless Steel shells 1/16" thick. Smooth running Nylon sheaves, 7/8" diameter, accommodate up to 5/16" rope. The finest in running gear for the many smaller boats that require quality hardware...

1/4" (6mm) Racelite Single Block

Small and compact, the RL-200 series blocks have one-piece Stainless Steel shells 1/16" thick. Smooth running Nylon sheaves, 7/8" diameter, accommodate up to 5/16" rope. The finest in running gear for the many smaller boats that require quality hardware...

1/4" (6mm) Racelite Cheek Blocks

Lightweight. 3/4" wide by 3" long. Fastens with one #10 machine screw and two #8 wood screws Here is an exploded view, note the stainless bushing. Cat No.RL-340Sheave (Nylon)1"For Rope Dia.1/4"

5/16" (8mm) Racelite Rail Mount Block

Any time you need a fixed block attached to the rail of a boat, you may be able to use this one. It can be used to raise a flag or banner, for a jib sheet, topping lift, or gravity shower, or any of dozens of uses.Complete with bushing to fit any...

5/16" (8mm) Racelite Stacked Double Cheek Blocks

For outhauls or other spar or deck mounted applications where more mechanical advantage is required. Sturdy, stainless steel and Nylon construction. Cat No. RL-708-AD ...

5/16" (8mm) Racelite Single Becket Blocks

Race-Lite 700 series blocks have cheeks and straps of the highest quality 18-8 stainless steel, burnished to a high luster finish. Cheeks are flaired to eliminate line chafe, and punched with lightening holes to reduce weight. Sheaves are Nylon turning...

5/16" (8mm) Racelite Swivel Base Becket Deck Blocks

Rolled edges on the cheeks of Race-LIte 300 series blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction,...

5/16" (8mm) Racelite Jib Blocks

Catamaran jib leader block has 18-8 stainless steel cheeks flaired to eliminate line chafe and punched with lightening holes to reduce weight. This block has a white Nylon sheave designed for 3/16" to 5/16" line turning on a stainless steel bushing.Cat...

5/16" (8mm) Bronze Fast Eye Pulleys

These bronze blocks are so salty they'll make your eyes burn. Use them to add a touch of class to your boat.Cat No.PH3-5Rope Dia.5/16"Sheave Dia.1-1/4"Sheave Width3/8Eye Dia.1/2"

5/16" (8mm) Racelite Single Becket Block

Rolled edges on the cheeks of Race-LIte 300 series blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction,...

5/16" (8mm) Racelite Swivel Eye Blocks

Rolled edges on the cheeks of Race-LIte 300 series blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction,...

5/16" (8mm) Racelite Single Block

Rolled edges on the cheeks of Race-LIte 300 series blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction,...

5/16" (8mm) Racelite Traveler Blocks

Rolled edges on the cheeks of Race-LIte 300 series blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction,...

5/16" (8mm) Racelite Single Blocks 1

Race-Lite 700 series blocks have cheeks and straps of the highest quality 18-8 stainless steel, burnished to a high luster finish. Cheeks are flaired to eliminate line chafe, and punched with lightening holes to reduce weight. Sheaves are Nylon turning...

5/16" (8mm) Racelite Track Slide Deck Blocks

This block is part of the proven 300 series of Race-Lite blocks. It has a base that is formed to work with standard 5/8" stainless steel sail track. The primary use is for jib sheet blocks but could be used for many other applications. ...

5/16" (8mm) Racelite Cheek Blocks 1

Race-Lite 700 series blocks have cheeks and straps of the highest quality 18-8 stainless steel, burnished to a high luster finish. Cheeks are flaired to eliminate line chafe, and punched with lightening holes to reduce weight. Sheaves are Nylon turning...

5/16" (8mm) Racelite Swivel Block

Rolled edges on the cheeks of Race-LIte 300 series blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction,...

5/16" (8mm) Racelite Shackle Becket Block

Rolled edges on the cheeks of Race-LIte 300 series blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction,...

5/16" (8mm) Racelite Cheek Blocks

Rolled edges on the cheeks of Race-LIte 300 series blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction,...

5/16" (8mm) Racelite Swivel Base Deck Blocks

Rolled edges on the cheeks of Race-LIte 300 series blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction,...

5/16" (8mm) Racelite Single Blocks

Race-Lite 700 series blocks have cheeks and straps of the highest quality 18-8 stainless steel, burnished to a high luster finish. Cheeks are flaired to eliminate line chafe, and punched with lightening holes to reduce weight. Sheaves are Nylon turning...

3/8" (9mm) Racelite Deck Block

Here is a simple little deck block - sometimes called a turning block.Cat No.RL-2040Sheave (Nylon)1"For Rope Dia.1/4" - 3/8"Height1-3/8"Width3/4"Bolt Centers1-3/8"

3/8" (9mm) Bronze Deck Block

These bronze blocks are so salty they'll make your eyes burn. Use them to add a touch of class to your boat. Cat No. PH20 Rope Dia. 3/8" Sheave Dia. 1-1/2" Sheave Width 1/2 Screw Size #12

3/8" (9mm) Bronze Fast Eye Pulleys

These bronze blocks are so salty they'll make your eyes burn. Use them to add a touch of class to your boat.Cat No.PH3-7Rope Dia.3/8"Sheave Dia.1-1/2"Sheave Width9/16Eye Dia.1/2"

7/16" (11mm) Racelite Swivel Block-

Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction, roll smoothly on Stainless Steel bearing sleeves. Used on deck plates, spinnaker halyards, etc. Has special stepped rivet with large head for maximim...

7/16" (11mm) Racelite Fiddle Blocks

Rolled edges on the cheeks of Race-Lite RL-378-A blocks protect expensive rope, and guard against marring and denting of finished decks and other areas. Nylon sheaves, correctly proportioned for maximum rope life, with inner hubs to reduce friction, roll...