Hardware

FEATURES Low friction High static and dynamic load capacity Lightweight Low profile swivelling hook for quick and easy attachment Hook suits rope, stainless steel and webbing fixing points Sheave Ø 3/4 in. Max. Rope Ø 1/4 in. M...

These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12...

These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed...

Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for...

Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32"

Two of these stainless formed tangs constitutes a hound. The ones in the photo above are held together by a twist tie to show how they would be aligned in practice. Part No. Mast Size Strap Hole...

This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel

Built from .090" stainless steel for extra strength. Base 3-1/2" long by 2-1/4" wide teardrop shape. Takes four #10 screws. Fin has two 1/4" holes and one 1/2" hole for jib tack.

27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs   27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /...

Sold in pairs.   These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive.

These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive. Sockets are either angle mount or top mount...

These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side...