Aluminum Vertical 4-Switch Panel

Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific...

Viadana Double Ball Bearing Block w/Becket 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Viadana Double Ball Bearing Block 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load...

Viadana Single Ball Bearing Block w/Becket w/Swivel 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Viadana Single Ball Bearing Block 38mm w/Swivel

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Viadana Single Ball Bearing Block w/Becket 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Viadana Single Ball Bearing Block 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Cast Jam Cleat

A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for...

5/16" Viadana Linked Ball Bearing Block

A traveler block is used to run a sheet through a block that itself runs on a rope horse.   Since 1961, Viadana has produced and supplied sailing outfits, while offering a long history of experience in research, design, manufacturing, and marketing...

Rubber Sleeve

Black, heat shrinkable rubber sleaves for oars. Sold as a pair, roughly 8" each with an ID of 2-1/8" prior to shrinking. Part of the Rubber Sleave Kit for XPL oars.

Heavy Duty Bail

Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U

Aluminum Breaker Panel

Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to...

Track Fittings

Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon.

Jaw Slide & Bracket Fittings

These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured...

Round Stainless Base Fittings

Part # Description Tube O.D.* Base Fastener SD-280300   30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen...

Sea Dog Stainless Steel Swivel Eye Plate with Ring

Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to...

TRIANGLE RING

Formed 304 Stainless Steel

LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT

These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater...

Captive Pin Bow Shackle

With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains...

Viadana Stainless Steel Shroud Adjuster 120mm

Comes with manufacturer two-year warranty Length - 120mm / 4 11/16" Thickness - 2mm / 5/64" Pin Size - 6mm / 1/4"

SeaLect Triple Latch Hatch

The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many...

Quarter-turn Deck Plate w/internal collar

The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline...

Toggle Switch Panel with USB Power Socket

The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of...

Ronstan Line Hanger

Lightweight hook used with light lines and elastic shock cord in a variety of applications. Great located on bulkheads. They provide a quick and economical means of securing lines, sails and other gear. Recommended: short length of 3/16" shock cord here...

Ronstan Single Hook Block

FEATURES Low friction High static and dynamic load capacity Lightweight Low profile swivelling hook for quick and easy attachment Hook suits rope, stainless steel and webbing fixing points Sheave Ø 3/4 in. Max. Rope Ø 1/4 in. M...

Oblong Eye Plate

These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12...

Bow Eye

These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp...

Deck Mount Bow Socket

These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed...

Phenolic Through-Deck Fairleads

Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for...

Viadana Stamped Dee (D) Clevis Pin Shackle 6m

Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at...

Viadana Inox JamCleat

Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32"

72 Piece Stainless Tapping Screw Kit

Racelite Formed Tangs (Hounds)

Two of these stainless formed tangs constitutes a hound. The ones in the photo above are held together by a twist tie to show how they would be aligned in practice. Part No. Mast Size Strap Hole...

Curved Base Pad Eye

This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel

Viadana Stainless Steel Swivel Base

Stainless Bow Fitting

Built from .090" stainless steel for extra strength. Base 3-1/2" long by 2-1/4" wide teardrop shape. Takes four #10 screws. Fin has two 1/4" holes and one 1/2" hole for jib tack.

Seadog Nylon Step Handle

Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles...

An inexpensive, durable oarlock system

If you're looking to outfit your boat with nice-looking traditional oarlocks at a good price—here's the package for you. Includes a set of premium brass oarlocks, premium brass oarlock sockets, and a set of oar collars that come with brass nails to...

Viadana Stamped D Clevis Pin Shackle

27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs   27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /...

Seadog Fender Hook

Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH...

Seadog Galvanized Top Mount Oarlock Sockets

Sold in pairs.   These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive.

Seadog Galvanized Round Oarlocks

These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive. Sockets are either angle mount or top mount...

Seadog Stainless T-Handle Drain Plug

These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or...

Seadog Pop-Out Deck Plates - Black, White & Clear

Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and...

Small Top Mount Bimini Deck Hinges

These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side...

Bimini Top Inserts

These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel...

2-3/4" Cast Brass Take Apart Butt Hinges

Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH

2" Cast Brass Take Apart Butt Hinges

Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH

Stainless Short Side Door Hinge

A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.

Seadog Stainless Pad Eyes

Stamped pad eyes - strong and economical. Made from 304 stainless steel. Part # A B C D E SD-081101 7/16" 7/16" 1-1/8" .060" 5/32" SD-081102 1/2" 9/16" 1-3/8" .080" 3/16" SD-081103 3/4" 3/4" 1-3/4" ...