Hardware

Injection Molded Nylon/Chrome Plated Zinc. LED Removable All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: drawing is not proportional   Part # A B C D Fastener SD-400015 24-5/8" 18-1/2" 5/8" 2-7/8" #8FH

A nylon cleat with a tooth design that offers a quick, positive lock that is easy to release. Works with line sizes 1/8" to 1/4" (3-6mm). The side entry fairlead allows the cleat to be hooked onto the line, without threading the rope through an eye,...

#10 through 3/4"

Injection Molded Nylon If you want a bimini that will easily snap out to be completely removed, and is side mounted, you may want to consider this pair. We only have them for 3/4" tubing (also fits 1/2" electrical conduit). The bracket is screwed or...

Used on the ends of bimini tubing sections These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4"...

6.4mm (1/4") dia. clevis pin, 51mm (2") long, 1 x 6.4mm (1/4") fixing holeUsed for terminating wire riggingGrade 316 stainless steel0.7 oz. - 20 g

Stamped stainless steel For use where a line or wire has to pass through a deck or spar Both plates are 1-1/4" x 2" x 1/16" thick. There are four holes for #8 fasteners and they will pass up to a 3/8" line, wire or rod. The RL-255C is curved to mount on...

Injection molded Nylon Sea-Dog Nylon lateral clamcleats - mount on either side of a centerboard case, on gunwales, coaming, or other vertical surface.

Injection Molded Nylon

This is the RL 349 adjuster for shrouds.

Sand cast bronze only for the saltiest of boats. Specifications FINISH Cast Finish MATERIAL Plain Bronze SHANK LENGTH 6 in SHANK DIAMETER 3/8 in EYE DIAMETER 1 in WEIGHT 0.45 lb NOTE The bronze bow eyes come with a shouldered stem...

Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is...