Hardware

RAPTOR® nails are not susceptible to the corrosion and oxidation that attacks metal, so your manufactured product retains its beautiful new appearance. RAPTOR® nails and staples can be sanded and sawed without tool damage, so you will not need to...

kit contains all the parts shown above Store your paddle or pole while on the water using the newest kit offering from SEA-LECT Designs. (see installation video below) Kit Includes: (2) 18" Keeper Bungees, (4) Bungee Terminal Ends w/ Sleeves,...

316 Stainless Reference RF48A RF49 A 13/32 in. 13/32 in. B 13/32 in. 7/16 in. C 2-17/32 in. 2-15/16 in...

black anodized aluminum and marine grade nickel plated brassChoose from:Round .50" dia. X .875" (13 x 22 mm)Flat .42 x 1 x .125" (11 x 25 x 3 mm)

High quality heavy cast brass strap hinges. Part# A B C D E Fastener SD-204401 6" 3" 3" 1-5/16" 3/16" #10 FH  

A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 6 #8 flat head fasteners.

Stainless Steel The kit you need will be determined by the material and the thickness of the material that you are mounting to. For wood - if the wood is at least 1/2" thick, wood screws are fine. For any material that is 3/8" or less, then we recommend...

A quick opening deckplate These Quarter-Turn Deck Plates feature a new locking system that prevents over tightening, jamming, or cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge...

Has internal collar to accept SeaLect bags These rings have an internal collar to accept SeaLect Bags. Below is a picture of the hatch with the red drawstring bag (bags sold separately):Covers can be bought HERE    

These are genuine bronze standard oarlocks. They are sand cast by Buck Algonquin. They should be used with Buck Algonquin Bronze oarlock sockets. Specifications Finish Cast Finish Material Bronze Oar Lock Size # 0 Horn I. D. 2-1/8 in Overall...

For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of...

These utility oarlocks are good for beginners as they hold the blade in position. They will clamp onto a shaft from 1-1/4 to 1-3/4 inches in diameter without modification. Mild steel construction permits modification to accomodate just about any shaft...