null

Canoes & Kayaks

  • 12' Baby Raven Plans

    12' Baby Raven Plans

    The Baby Raven is a smaller version of the Raven canoe and has a similar midship shape with tumblehome—this puts the maximum beam down at the waterline maximizing stability whilst at the same time making it easier to paddle. She has 3 chines per side...
    $61.00
    Choose Options
  • 14' Fisher Prospector Plans

    14' Fisher Prospector Plans

    A 14' version of our most popular canoe design - the 15' 8" Fisher Prospector. Over the years, the 15'8" Prospector has been cut down by those wanting a shorter version simply by cutting a piece out of the middle - this works but is not ideal and so I...
    $61.00
    Choose Options
  • Dart 22 Plans

    Dart 22 Plans

    The DART 22 uses a similar section to that of the Dart 16. This consists of a tortured ply ‘U’ shape which changes fore and aft into a full ‘V’ giving adequate buoyancy and a good entry at the fore foot. Above the shaped bottom there is a soft...
    $61.00
    Choose Options
  • Dart 16 Plans

    Dart 16 Plans

    The Dart 16 double kayak has a soft ‘U’ shaped bottom running into flared ‘V’ sections fore and aft with a chine, giving a very stable shape. She has a large 7’ long cockpit and with her 32’’ (0.81m) beam she is...
    $61.00
    Choose Options
  • JC10 Plans

    JC10 Plans

    The JayCee was conceived with Tyrone Boats as a trainer for the International Canoe. The idea was to produce a craft which was based upon low cost, easy building techniques and which would be an introduction into the world of IC sailing. With all this...
    $100.00
    Choose Options
  • 17' Hazelnut Open Canoe

    17' Hazelnut Open Canoe

    The requirement was for a canoe with the same stability, capacity and maneuverability as the 17' Prospector but without the high swept back ends and a flatter sheer line. So I took the Prospector model and kept the same mid-section with it's tumblehome...
    $88.00
    Choose Options
  • Explorer 16 Plans

    Explorer 16 Plans

    The Explorer 16 is a strip planked canoe with fine lines towards the bow and stern running into an easy 'U' shaped mid body. She has tumblehome in the topsides which make her easy to paddle and which puts the maximum beam at the waterline giving...
    $81.00
    Choose Options
  • 18'6" Marathon Asymmetric Canoe

    18'6" Marathon Asymmetric Canoe

    The 18’6” Marathon open canoe has been designed for serious long distance paddling. She has 5 planks per side and uses the stitch and tape method of construction for ease, low cost and lightness. Her hull shape is asymmetric giving her a low drag...
    $88.00
    Choose Options
  • Explorer 15 Plans

    Explorer 15 Plans

    This design is a slightly smaller sister to our Explorer 16' open strip planked canoe - in this case we have used a similar hull design with a 'U' shaped mid body with plenty of tumblehome in the topsides making her easy to paddle and very stable...
    $81.00
    Choose Options
  • 40' Dragon Plans

    40' Dragon Plans

    Well, this is a boat for the purely insane or totally inebriated!, and it is an example of the wide range of boat designs that we are asked to produce from clients all over the world. Basically, she is a slightly thinned and greatly stretched Waterman...
    $88.00
    Choose Options
  • 20' Freight

    20' Freight

    This canoe has been designed for a client who wanted a canoe which would take a crew of 8 or so adolescents. She is designed to be built and transported in two halves (although she can be built in one piece) and bolted together at the waters edge...
    $88.00
    Choose Options
  • Guide 18 Plans

    Guide 18 Plans

    The Guide 18 is a large open canoe for carrying a crew of up to 5 people and/or gear safely over long distances. She has a well rounded hull shape and uses 5 planks per side. The hull has tumblehome putting the greatest beam down at the waterline...
    $88.00
    Choose Options
  • 14'6" Esk Sea Kayak Plans

    14'6" Esk Sea Kayak Plans

    The 14’ 6” Esk is a development of our Dart design. We have swept the bow up and flared out the forward sections to help her in choppy waters—aft, we have given her a knife edge to the rear sections to give her good directional stability. She has...
    $61.00
    Choose Options
  • 35' Dragon Racing Canoe Plans

    35' Dragon Racing Canoe Plans

    This is a 7 or 8 man racing canoe (plus steersman) for stitch and tape plywood construction using mainly 12mm plywood. She can be made in boltable sections and therefore shortened/lengthened amidships to vary the number crewing her.. She has been...
    $88.00
    Choose Options
  • 14' Cree Strip Planked Kayak Plans

    14' Cree Strip Planked Kayak Plans

    The Cree 14 is essentially a strip planked version of the Esk 14. The mould shapes are given full-size and details are given for a simple building jig. 6mm thick Western red Cedar is used for the strip planking although other woods may be used.Normally...
    $75.00
    Choose Options
  • Woodland 15 Open Sailing Canoe Plans

    Woodland 15 Open Sailing Canoe Plans

    This is a clinker/ply open canoe with graceful lines. We have given the hull shape a fairly fine entry so that she glides on the water and also a good waterline beam to allow her to carry a substantial rig for open canoe racing. She has 5 planks per...
    $68.00
    Choose Options
  • 12'x30" Adirondack Guide Canoe Plans

    12'x30" Adirondack Guide Canoe Plans

    I have often admired the Adirondack style of Guide Boat with their swept back ends, gorgeous sheer line—often higher forward than aft and pinched entry and exit to their waterline—they came in several different sizes and styles—some with small...
    $74.00
    Choose Options
  • 15' Outboard Motor Canoe Plans

    15' Outboard Motor Canoe Plans

    This 15' (4.58m) design is an extended version of our 12'6" Outboard Motor Canoe and uses the same basic hull shape with it's narrow flat bottom panel with 3 further panels added each side to form an attractive but stable and easily built shape. 3 seats...
    $68.00
    Choose Options
  • 19' Greenland Kayak Plans

    19' Greenland Kayak Plans

    The Greenland 19 has a simple V bottomed single chine stitch and tape plywood hull designed to ride out rough water with ease and to have a good turn of speed. She has an optional daggerboard box to help in directional stability. The deck is strip...
    $75.00
    Choose Options
  • 15'8" Seafox Plans

    15'8" Seafox Plans

    The Seafox is a development of our Seawolf design using 4 planks per side rather than 2 giving a well rounded and very attractive hull shape. she has storage and buoyancy areas fore and aft and a 3' long cockpit opening. Construction uses 3 sheets of...
    $61.00
    Choose Options
  • Viking 16 Plans

    Viking 16 Plans

    This canoe is an interesting development of our Fisher Prospector canoe for clients who want to turn up to the local open canoe meet in threatening manner ready to do a bit of pillaging etc! As far as I know, the Vikings did not have small canoe...
    $68.00
    Choose Options
  • DW6 Racing Canoe Plans

    DW6 Racing Canoe Plans

    This open canoe has been designed as a simple low cost solution to taking part competitively in the Devizes Westminster race. The hull has an asymmetric shape with a narrow entrance angle to the forward waterlines and with additional buoyancy aft. The...
    $68.00
    Choose Options
  • 16' Strip Planked Pete Canoe Plans

    16' Strip Planked Pete Canoe Plans

    This is an example of how we can, using our YachtCAD system, change a design from a multi-chine ply hull shape to a round bilged hull shape suitable for strip planking (or visa versa). A client wanted the graceful shape of our Pete canoe—but he wanted...
    $81.00
    Choose Options
  • 18' Ralph

    18' Ralph

    Ralph has been designed as an open trekking canoe. The client who asked us to draw her up wanted a large open canoe that could take a family safely exploring Scottish sea lochs. She therefore had to handle the short chop and winds that often cut across...
    $88.00
    Choose Options
  • 24' Tikopian Canoe Plans

    24' Tikopian Canoe Plans

    The Tikopian 24 is based on the 18' Waka Ama and uses the same stitch and tape plywood construction process. She has 4 seats plus stowage compartments in the ends of the canoe but can be fitted out in various ways - ie. with more seats and storage. The...
    $115.00
    Choose Options
  • 16' Pete Plans

    16' Pete Plans

    This is the Selway Fisher version of an old favourite - the Prospector type open canoe. The original Prospectors were originally designed in Canada and known as the "workhorse of the North". They had to have a good carrying capacity for all of the...
    $68.00
    Choose Options
  • 12'9" Waterboy Open Canoe Plans

    12'9" Waterboy Open Canoe Plans

    This canoe is based upon our Waterman 13 which has been given a larger capacity by introducing tumblehome into the topsides and giving her a little more depth—(14”/0.355m) - this makes her excellent for carrying larger loads on a short length and...
    $61.00
    Choose Options
  • Sophia 10 Plans

    Sophia 10 Plans

    This canoe is based on our Christine design. She has a length of 10' (3.05m) and a beam of 26 1/2" (0.67m) with a nice round bilged shape given by having 4 planks per side. There is a buoyancy/storage chamber at each end and she is designed to be used...
    $61.00
    Choose Options
  • The Lillie Canoe Yawl Plans

    The Lillie Canoe Yawl Plans

    The Lillie Canoe Yawl - this lovely craft was commissioned by Tom Dunderdale after reading the series of articles in the Classic Boat magazine on the 13' strip planked canoe yawl Ethel. The idea was to produce a canoe yawl of similar style to those of...
    $27.00 - $162.00
    Choose Options
  • 20' x 28" Marathon Asymmetric Canoe Plans

    20' x 28" Marathon Asymmetric Canoe Plans

    This design is a development of the 18’6” Marathon open canoe with it's easily driven asymmetric hull shape. Beam has been reduced to 28" which is positioned down at the waterline. Like her smaller sister she has 5 planks per side and uses the...
    $88.00
    Choose Options
  • IC10 International Canoe Plans

    IC10 International Canoe Plans

    The IC10 - a ply stitch and tape "B" Class International Canoe for Mr. Peter Rhodes-Dimmer - the first hull has been constructed by Alan Powell. The major idea behind this design was to produce an up-to-the-minute hull shape suitable for both inland and...
    $270.00
    Choose Options
  • 12' Asymmetric Baby Raven Plans

    12' Asymmetric Baby Raven Plans

    This canoe is based upon our Baby Raven which is an all round general purpose canoe—this asymmetric version gives a slightly faster craft for single handed use—she would also make a good sailing canoe and would fill the remit of a slightly smaller...
    $61.00
    Choose Options