Canoes & Kayaks

The Waterman canoes are more than simple open Canadian type canoes; they are a complete canoeing experience - from simply being a family open day canoe to a camping/sailing/portaging craft capable of being used to explore normally impenetrable rivers and...

This a smaller version of our popular 12’9” Waterboy. The design has the same high volume hull with tumblehome and 4 planks per side with a narrow flat bottom as it’s bigger brother. Construction is simple stitch and tape using 4mm ply...

This is a new design for 2001 - we were asked to reduce the length of the Waterman 13 by a foot so that she could be made in 2 boltable halves and fitted into the back of a van for transporting to the water. She was also to be the client's first venture...

The Ocean Crossing Kayak is the first stage in an experimental project - some ocean going kayaks are quite large with volume to carry extensive stores and are made from exotic materials to keep weight down - some have 'castles' at bow and stern so that...

A leisurely craft from the Edwardian and Victorian eras - days of elegance on the Thames with parasols and wine! we were commissioned to design such a canoe, to be powered by a Gebofa electric 1.6 hp sail drive unit and constructed using modern clinker...

The Hazelnut has been designed for those who want a similar hull shape to the Peterborough model but without the turned up ends. This gives a flatter sheer line more like a guide boat—she retains the 5 plank per side shape with tumblehome for ease in...

Our 15' 8" Fisher Prospector is our most popular canoe design (go to Open Canoes 15'-17'). This new version has been requested by a client who wanted a similar canoe, slightly shorter and with 7 planks per side rather than the 5 of the original design...

This is a strip planked version of our plywood motor canoes—because she is strip planked over computer generated moulds, the spacing between the moulds can be altered to give any length between 12’ and 16’. Apart from using an outboard motor...

By popular request, we have shortened the Raven to give a canoe easier to car-top on smaller vehicles. She can take 2 adults plus camping gear and uses the same simple stitch and tape construction process. The hull has the Raven family’s 3 panels per...

The Sealion was originally modelled on our Seafox sea kayak but the use of Cedar Strip planking for her construction allows a more graceful and curvaceous shape both for the hull and the deck. She is built over computer faired mould shapes set up on a...

A Strip Planked version of our most popular design - the Fisher Prospector Open canoe - plans include full-size templates for the moulds and the sail plan of the FP16. 15'8" Strip Planked Prospector Particulars LOA 15'8" 4.76m Beam 35" 0...

This is a modern ‘sit-on’ type kayak where the cockpits are essentially open and sealed from the remainder of the kayak. The areas around the cockpits are used for both storage and buoyancy.Construction uses 3 or 4mm plywood throughout and the stitch...