MSRP:
Now:
$6.50 - $20.00
Was:
— You save
Description
for making structural fillets
Wood flour is very fine, filtered, sawdust-like wood by-product. It is an excellent all around filler for creating glues and structural fillets. Use in sewn-seam and stitch and glue construction. Wood flour combines with epoxy to make a non sagging fillet.
Related Products

Folding Blade Keyhole Saw with Replaceable Blade
MSRP:
Now:
$21.95
Was:
Like our regular folding pull saw, this is an ideal candidate for the portable emergency toolbox you carry on your boat. Works fine around the shop too.
Here is what Woodcraft says:
Our Pocket...

4" x 15tpi Keyhole Pullsaw
MSRP:
Now:
$19.95
Was:
Keyhole saws are used to make curved cuts, and by first drilling a pilot hole, closed inside cuts. Because they cut on the pull stroke and have very sharp teeth, they make clean cuts in the most

4" Spring Clamp - 2 pack
MSRP:
Now:
$5.99
Was:
These ToolPro 4â Spring Clamps are strong and hold firmly. They feature rubber tips which wonât damage surfaces, and are made of nickel-plated steel with tempered steel springs. These spring...

12" Bar Clamp
MSRP:
Now:
$13.25
Was:
This economical Clutch-Style Bar Clamp has cast heads, coated steel bars, wooden handles and swivel pads, but not the higher price. Affordable enough to fully equip your shop and to solve all your...

Gyokucho Double Edge Razorsaws
MSRP:
Now:
$24.99 - $54.99
Was:
I have used these off and on and especially liked one that I tried in DavidNichols' shop once. So I asked what kind it was and bought one for my shop. I hav
Customers Also Viewed

RAKA Resin & Hardener Kits
MSRP:
Now:
$75.00 - $425.00
Was:
RAKA is a good, economical boat building epoxy. It resists blushing and cures clear. Use it for laminating as is or with additives to make gluing, fairing and filleting mixes.Note: This epoxy is not...

Silica Thickener
MSRP:
Now:
$14.50 - $17.50
Was:
high strength thickening agent for epoxy
The most popular thickening agent for epoxy, silica makes a smooth, non-sagging, high-strength mixture for structural bonding, filleting and filling.
Mix both...

Phenolic Microballoons
MSRP:
Now:
$32.99
Was:
These hollow, purple-brown phenolic spheres make a low-cost low-density filler. They make a light-weight fairing compound with good compressive strength. Blend with Silica Thickner to prevent...

Glass Bubbles
MSRP:
Now:
$18.50 - $28.50
Was:
Glass bubbles are lightweight hollow white glass spheres. When mixed with epoxy, this light weight filler will make a very easily sanded putty for filling and fairing. Use the same as phenolic...

SilverTip Resin & Hardener Kits
MSRP:
Now:
$89.00 - $1,699.00
Was:
Sets of resin and hardener in proper ratios
Silvertip Epoxy is a premium laminating resin from System 3. Not only is it designed to have all the best characteristics for boat building, but it has the...

Graphite Powder
MSRP:
Now:
$9.95
Was:
Renn Tolman and others recommend you mix Graphite Powder with epoxy resin to make a kind of paint for bottom coating boats. It is said to aid abrasion resistance and to inhibit marine growth. The...

Epoxy Pumps
MSRP:
Now:
$6.95 - $7.95
Was:
Sometimes called "mustard pumps," these dispensers deliver a measured amount of any brand laminating epoxy, The large pumps fit 1 gallon, 1/2 gallon and Raka 1 quart containers. For System3...

Peel Ply
MSRP:
Now:
$1.25 - $350.00
Was:
Available 50" or 10" wide - by the yard or 100 yard roll.
There is a $10 charge to ship fiberglass orders under 10 yards on a roll. To have your cloth shipped this way,...

Biaxial Fiberglass Tape
MSRP:
Now:
$1.99 - $99.00
Was:
This is the stuff that is used for stitch and glue construction or for other reinforcement needs. Soak it with epoxy resin to reinforce plywood joints. Biaxial cloth has no selvages and will conform...

RAKA UV Kits
MSRP:
Now:
$150.00 - $599.00
Was:
UV Resistant formula
RAKA is a good, economical boat building epoxy. It resists blushing and cures clear. Use it for laminating as it or with additives to make gluing, fairing and filleting mixes...