Sailboat Hardware

For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of...

Note: size = diameter of pin Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment cast 316 stainless steel these jaw to jaw swivels are...

Forged, then hot dipped galvanized SD-147804, SD-147806, SD-147808 Part No. Size A B C D Weight SD-147804 3/16" 1/4" 3/8" 9/16" 13/16" .04 lb. SD-147806 1/4" 5/16" 7/16" 3/4" 1-1/16" .07 lb...

Your basic black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 3" ,4", 5", & 6.5" sizes  

Hardwood - Three sizes These wooden beads will work great for parrels of all kinds. The 12mm (roughly 1/2"), 16mm (roughly 5/8") and 18mm (roughly 3/4") dia beads have 5/32" holes. The 25mm (roughly 1") dia beads have 7/32" holes.

These Pad Eyes are great for block attachment, controlling lead lines, or creating tie down points. Constructed forged brass wire. Installs with two FH fasteners (not included). Part # A B C Fastner SD-081270 5/16" 3/8" 1-3/8" #8...

Our RL-690 transom pintles are the same as used on most Lightning class sailboats. They are typically mounted on a flat transom and paired with a rudder gudgeon. More details under "Particulars" tab. To find out which gudgeons work with these pintles,...

See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener  

Aluminum The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. These cleats were strongly recommended by Mike Storer. Click to view/download installation guides:  SD-002171 SD-002172

Stainless steel swivel. Strap is 0.06" by 3/8". 3/8"+ between tangs. 1-5/8" long over all.Takes 3/16" x 1/2" pin.

RL-250 - Fixed Gooseneck - Screws or rivets to standard boom - mounting strap is 3/4" wide and set for 2-1/2" mast but could be adjusted 1/2" either way.Shown with tangs

These halyard shackles have a lever action for easy opening and closing, with a keyed pin for positive locking.Grade 316 stainless steel bodies and pins ReferenceImperialMetricA3/16 in.4.8 mmB7/8 in.22.0 mmC13/32 in.10.5 mmD19/32 in.15.0 mmP.L. B.L.1980...