Sailboat Hardware

FEATURES Low friction High static and dynamic load capacity Lightweight Low profile swivelling hook for quick and easy attachment Hook suits rope, stainless steel and webbing fixing points Sheave Ø 3/4 in. Max. Rope Ø 1/4 in. M...

Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at...

Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32"

Two of these stainless formed tangs constitutes a hound. The ones in the photo above are held together by a twist tie to show how they would be aligned in practice. Part No. Mast Size Strap Hole...

Built from .090" stainless steel for extra strength. Base 3-1/2" long by 2-1/4" wide teardrop shape. Takes four #10 screws. Fin has two 1/4" holes and one 1/2" hole for jib tack.

Stamped pad eyes - strong and economical. Made from 304 stainless steel. Part # A B C D E SD-081101 7/16" 7/16" 1-1/8" .060" 5/32" SD-081102 1/2" 9/16" 1-3/8" .080" 3/16" SD-081103 3/4" 3/4" 1-3/4" ...

Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without...

A deceptively simple ridged `V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. Always tension the rope before it enters the cleat...

These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a...

This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel. (note: pintle...

RL-328 - Fixed Gooseneck - Screws or rivets to standard boom and mast. Base is 1.5" x 3".Shown here with tangs