Rowboat Hardware

Black, heat shrinkable rubber sleaves for oars. Sold as a pair, roughly 8" each with an ID of 2-1/8" prior to shrinking. Part of the Rubber Sleeve Kit for XPL oars.

Sold in pairs.   These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive.

These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive. Sockets are either angle mount or top mount...

This pair of Gaco oarlocks fits standard 1/2 inch oarlock sockets. No sockets are included.Why it works so well: Ordinary rowlocks develop friction and wear because of the uneven pressure where the pin rotates in the socket. In the GACO rowlock...

With the success of our Standard Paddle Ferrules and Greenland Style Ferrules, we naturally thought about having some made for oars. John Welsford approached us about using what were then the largest ferrules - the Greenland ones - to make take apart...

What is it? The Scullmatix is a simple device to make sculling a boat almost automatic. It is made from 1/8" stainless steel plate and has two 5/16" SS carrage bolts with wingnuts. It weights just under 2 lbs. It is very robust - it should last several...

Davis style oarlock sets are made so that the oarlock will fold down in the socket yet be retained so it cannot be lost. These hot-dipped galvanized iron ones are more economical than our stainless model. Specifications Finish Malleable...

These are very elegant brass oarlock sockets. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. Not only are these premium sockets nicely finished but they come with nylon bushings The alloy is an...

These utility oarlocks are good for beginners as they hold the blade in position. They will clamp onto a shaft from 1-1/4 to 1-3/4 inches in diameter without modification. Mild steel construction permits modification to accomodate just about any shaft...

These utility oarlocks are good for beginners as they hold the blade in position. They will clamp onto a shaft from 1-1/4 to 1-3/4 inches in diameter without modification. Mild steel construction permits adjustment to accomodate just about any shaft size...

Injection Molded Nylon. The reason we are offering these singly rather than as a pair is that they would be ideal, I think, to mount on a transom for a sculling oar. The socket is heavily built and quite strong. It will work with any of the oarlocks we...

These are very elegant brass side mount oarlock sockets. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. Not only are these premium sockets nicely finished but they come with nylon bushings. The...