Hardware

8mm (5/16") dia. clevis pin, 64mm (2 1/2") long, 1 x 9.5mm (3/8") fixing holeUsed for terminating wire riggingGrade 316 stainless steel1.4 oz. - 40 g

These glass-filled injection molded nylon hinges have a stainless steel pin and are practically indestructable. They are economical too. Use them for all interior and exterior applications on your boat - hatches, folding tables or seats, windows and much...

This Aluminum cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is easy to release is required. The Sailor's preferred choice for adjusting trapeze lines, for light...

These are very elegant brass side mount oarlock sockets. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. Not only are these premium sockets nicely finished but they come with nylon bushings. The...

These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 3/8" from the ends. Nominal lengths are not from hole centers but total overall length.

A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted...

Replacement plug for SD-520010, SD-520020, and SD-520030

Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes...

These polished cast brass pad eyes can be used for a variety of applications both decorative and functional. Great for block attachment, controlling lead lines, or creating tie down points. Installs with two #8 FH fasteners (not included). Part...

Made of 3/32" Stainless Steel with mounting holes for #10 fasteners on 1-1/2" centers, 9/16" diameter eye. RL-413A1/2in.B5/8 in.C1-1/2 in.Weight.01 lb.

Often you want a push-pull tiller extension so that you can steer the boat from up on the rail or even from the bench seat if the boat is particularly beamy. This simple swivel from Race-Lite will fill the bill. Two round head #8 or #10 screws mount it...

These are genuine bronze oarlock sockets. They are sand cast by Buck Algonquin. They should be used with Bronze oarlocks. Specifications Finish Cast Material Bronze Flange Width 1-1/8 in Flange Length 3-1/4 in Length Under Flange 1-1/4...