Warren Messer

This is the last of the “bevel bottom” hulls that I will design. There are four of them now, and that should be enough. With the Green River, Cedar River, Naselle River, and now the James...

The Green River was the one that gave me the idea for the Naselle River Drifter. I started out designing this hull as a modified version on one of my regular drift boat hulls, but with beveled lower...

The 12ft Green River Drifter This hull was the one that gave me the idea for the Naselle River Drifter. I started out designing this hull as a modified version on one of my regular drift boat hulls,...

This hull is spin off of another hull I was working on over the winter. That hull, the Green River Drifter was a variation on my drifter hulls with a “beveled” chine panel on the lower...

Illustrated instructions for making your own hand screw clamps - click HERE to download

This new design has been floating around in my head for several years now. I really didn’t want to do any kayak or canoe designs, as there are already enough of them out there in the world, and...

Specifications LOA: 15ft 3" Beam: 70" Transom Width: 66" Transom Height: keel to motor mount 20" Weight: (+/-) 50lbs 500lbs Maximum Outboard: (LS) 35hp Maximum...

The 14ft Nuthatch Pram Thank you for choosing to build the 14 foot Nuthatch Pram. After designing and building the 8ft Nuthatch Pram and designing the 12ft Nuthatch Pram, I thought that a larger...

LOA 14.5ft - Beam 68” - Bottom 48” The Flat Head Drifter (FHD) is an enlargement of the Sol Duk Drifter(SDD) that I already have in my fleet of boats. I designed the SDD small enough...

I decided to add this larger version of the Electric Moto Craft to my growing fleet of EMC hulls after a comment and request from one of my YouTube subscribers. He had been watching one of...

8ft Nuthatch Specifications Length: 7' 10"Beam: 52"Weight: 72 lbsMax Outboard: 2 hpMaximum Load: 450 lbs This design is my first and the result of endless hours spent before a computer learning the...

After designing and building the 8ft Nuthatch Pram, I thought that a larger version of the hull would be a good fit in my series of stitch and glue boats. This is the finished design of the 12ft...